ADV.1 ADV5.0 Track Function (SL Series)
Available Sizes — ADV.1 ADV5.0 Track Function SL Series
The ADV5.0 Track Function SL is available in diameters from 13" through 24", with width and offset specified per build order. The 5 (.0 updated)-spoke Super Light architecture delivers an updated 5-spoke competition profile with revised spoke taper and the SL programme's inter-spoke material removal — the lightest 5-spoke Track Function configuration, with additional material removed between spokes compared to the standard CS variant to achieve the weight reduction that defines the SL programme.
| Diameter | Width Range | Typical Application |
|---|---|---|
| 18" | 8.5" – 10.5" | Sports coupes, track-day builds |
| 19" | 8.5" – 11.5" | Porsche 911, Audi R8, BMW M3/M4 |
| 20" | 9.0" – 12.5" | Ferrari 458/488, McLaren 570S, Nissan GT-R |
| 21" | 9.5" – 13.0" | Lamborghini Huracán, Mercedes-AMG GT-R |
| 22" | 10.0" – 13.5" | Widebody builds, luxury performance SUVs |
| 24" | 10.0" – 14.0" | High-offset luxury and SUV configurations |
All ADV5.0 Track Function SL sets are produced as build-to-order units. Contact the Hodoor team for a fitment consultation tailored to your vehicle platform and performance objectives.
Technical Specifications — ADV.1 ADV5.0 Track Function SL
The ADV5.0 Track Function SL is a 3-piece forged wheel in ADV.1's Super Light programme, featuring spoke geometry engineered to maximise airflow to brake assemblies with additional inter-spoke material removal for reduced unsprung mass. The SL designation indicates that machining passes beyond the standard CS specification have been applied to the centre disc — reducing wheel weight while maintaining the structural cross-sections that carry hub, lateral, and braking loads.
Construction: 3-Piece Forged (Outer Barrel + Inner Barrel + Centre Disc)
Material: 6061-T6 aerospace aluminium alloy
Spoke Count: 5 (.0 updated)
Series: Super Light (SL) — additional inter-spoke material removal
Hardware: Titanium centre bolts (standard)
Balance: Computer-balanced post-assembly
Certification: Engineered to DOT and ECE structural standards
The .0 designation in ADV5.0 Track Function SL identifies an updated 5-spoke geometry featuring revised spoke taper, updated lip-to-spoke transitions, and refined proportions compared to the original ADV5 — combined with the SL programme's inter-spoke material removal.
The 3-piece construction allows each component to be manufactured from optimally sized forgings, then assembled into the final wheel — enabling the SL machining passes to be applied to the centre disc without affecting the barrel geometry.
Track Function SL Design Philosophy
The Super Light programme represents ADV.1's approach to delivering the functional airflow-optimised spoke geometry of the Track Function series at the lowest achievable wheel weight within a 3-piece forged platform. Material is removed from areas of the centre disc that do not contribute to structural integrity under engineering load models — inter-spoke pockets, spoke root fillets, and barrel-to-face transitions — while the critical structural cross-sections that carry hub, lateral, and braking loads remain intact.
The ADV5.0 Track Function SL's 5 (.0 updated)-spoke profile in SL trim represents one of ADV.1's lightest configurations in the Track Function programme. For vehicles used in track environments or where the driver can directly perceive the performance benefit of reduced rotating mass in steering feedback, braking response, and acceleration feel, the SL is the appropriate selection over the CS variant.
Wheel Finish Options — ADV5.0 Track Function SL
The ADV5.0 Track Function SL is available across ADV.1's full custom finish portfolio. The SL's additional inter-spoke machining creates deeper channels and pocket areas that interact with finish treatments differently than the CS — directional brushed finishes produce more pronounced shadow and highlight contrast, and dark finishes create subtle three-dimensional shadow effects from the additional depth.
Brushed Polished Aluminum: Directional brush on the outer face, creating controlled reflection that follows the spoke profile and emphasises the functional channel geometry. Particularly effective on the SL where deeper pocket areas create richer contrast.
Gloss or Satin Black: Solid dark finishes allow the ADV5.0's functional geometry to read through shadow and depth. The SL's deeper channel profile creates more pronounced three-dimensional shadow patterns compared to CS.
Full Custom: Any RAL or Pantone colour, candy coat, anodised finish, or chrome treatment is available through ADV.1's Custom Forged Build Program. Contact the Hodoor team to discuss bespoke finish options.
ADV.1 ADV5.0 Track Function SL — Watch It in Action
The ADV5.0 Track Function SL has been documented across high-performance platforms in ADV.1's production photography and video archive. Visit the ADV.1 Wheels YouTube channel for build showcases. The Hodoor gallery features curated production photography from ADV.1's approved archive.
Vehicle Fitment — ADV5.0 Track Function SL Series
The ADV5.0 Track Function SL is the appropriate choice for drivers and builds where maximum unsprung mass reduction within a 3-piece forged platform is a performance priority — track-focused street vehicles, competition vehicles, and performance builds where reduced rotational mass translates into measurable driving improvement.
Porsche 911 and supercar platforms: The 5-spoke Track Function SL suits the 911's wide rear arch geometry and mid-engine vehicles where the open spoke face and SL weight reduction deliver combined thermal management and performance benefits.
Track-focused builds: The ADV5.0's updated spoke taper provides a distinctive visual differentiation from the original ADV5, while the SL material reduction benefits any vehicle where reducing rotating mass is a performance priority.
Contact the Hodoor team with your vehicle specification for precise offset, width, and bolt pattern recommendations for the ADV5.0 Track Function SL.
Compatible Bolt Patterns — ADV5.0 Track Function SL
- 5×112 — Mercedes-Benz AMG GT / C63 / E63, Audi R8, Lamborghini Urus, Porsche Cayenne
- 5×114.3 — Nissan GT-R, Acura NSX, Lexus LC-500 / RC-F, Ford Mustang GT500
- 5×120 — BMW M2 / M3 / M4, Ferrari 458/488 (select variants)
- 5×130 — Porsche 911 (991/992), Panamera, Cayenne GTS
- 5×108 — Aston Martin Vantage / DB11, Jaguar F-Type SVR
- Center bore: Machined to exact vehicle hub diameter per order specification
ADV.1 Track Function SL Series — CS vs SL Comparison
| Variant | Spokes | vs CS Weight | Best For |
|---|---|---|---|
| ADV005 SL | 5 | Meaningful reduction | Competition 5-spoke, deep dish |
| ADV05 SL | 5 | Meaningful reduction | Track 5-spoke, balanced profile |
| ADV10 SL | 10 | Significant reduction | Italian supercars, McLarens |
| ADV10.0 SL | 10 | Significant reduction | Track-day & road performance |
| ADV5.0 SL | 5 | Meaningful reduction | 5-spoke track variant |
| ADV8R SL | 8 | Significant reduction | Race-inspired 8-spoke track builds |
Explore the Full ADV.1 Track Function SL Series Lineup
The Track Function SL Series spans six distinct spoke architectures in an ultra-light 3-piece forged configuration. All models share the same construction, aerospace-grade 6061-T6 aluminium, and bespoke build-to-order workflow.
- ADV.1 ADV005 Track Function SL Series
- ADV.1 ADV05 Track Function SL Series
- ADV.1 ADV10 Track Function SL Series
- ADV.1 ADV10.0 Track Function SL Series
- ADV.1 ADV5.0 Track Function SL Series
- ADV.1 ADV8R Track Function SL Series
Frequently Asked Questions
What is the ADV.1 ADV5.0 Track Function SL?
A 3-piece forged wheel with functional airflow-optimised spoke geometry and additional inter-spoke material removal for reduced unsprung mass compared to the CS variant.
What is the weight difference between SL and CS?
The SL achieves meaningful weight reduction through additional machining on the centre disc. Exact differential depends on diameter and width — available from the Hodoor team upon request.
Are these wheels road-legal?
Yes. ADV.1 forged wheels meet DOT and ECE structural standards and are designed for high-performance road and track use.
Can I run a staggered setup?
Yes. Staggered fitments are fully supported on rear-wheel-drive platforms.
What is the production lead time?
Standard lead time is 10–14 weeks from confirmed order. Contact the Hodoor team if your build has a specific deadline.
ADV.1 Custom Forged Build Program
Every ADV.1 wheel is manufactured to order. Diameter, width, offset, centre bore, bolt pattern, and finish are all specified individually for each build — allowing the wheel to be engineered precisely for your vehicle's hub geometry, brake clearance, and arch clearance requirements. To initiate a custom build consultation, contact the Hodoor team via the enquiry form on this product page.
How to Order ADV.1 Wheels Through Hodoor
Step 1 — Consultation: Contact the Hodoor team with your vehicle make, model, year, current tyre size, and preferred finish. Email [email protected] or call/WhatsApp +44 748 881 8747.
Step 2 — Configuration: Specify your exact build parameters: diameter (13" through 24"), width, offset, hub bore, bolt pattern, and finish. Custom engravings and hardware finishes are available on request.
Step 3 — Production: Your order enters the ADV.1 production queue. All wheels are manufactured from scratch as build-to-order units. Lead time is typically 10–14 weeks from confirmed order.
Step 4 — Inspection and Shipment: Each set undergoes dimensional verification, balance confirmation, and finish inspection before crating for international or domestic shipment.
Discover ADV.1 Wheels on Hodoor
Hodoor is the dedicated platform for premium forged wheel brands, connecting performance enthusiasts with world-class manufacturers including ADV.1, HRE, Brixton Forged, Vossen, and more. Browse the complete ADV.1 catalogue on Hodoor, compare models, explore finish options, and access our concierge ordering team when you are ready to configure your build. Visit hodoor.world to explore the full catalogue. Reach our team at [email protected] or +44 748 881 8747.
Wheel Care & Maintenance
ADV.1 forged wheels require straightforward maintenance to preserve finish quality and structural integrity. Use a pH-neutral, non-abrasive wheel cleaner. Rinse thoroughly after brake dust treatment. Dry with a clean microfibre towel. Apply a dedicated wheel sealant or ceramic coating twice per year. Inspect hardware annually and after any track session. Remove from service immediately if any structural damage is observed.
International Delivery & Fitment
ADV.1 wheels are manufactured in the United States and shipped worldwide through Hodoor's international logistics network. All international shipments are fully insured and professionally crated. Customs documentation is prepared by Hodoor's export team. Import duties and VAT in the destination country are the responsibility of the customer. Contact the Hodoor team to discuss logistics and fitment arrangements for your location.
