ADV.1 ADV005 Track Function (SL Series)
Available Sizes — ADV.1 ADV005 Track Function SL Series
The ADV005 Track Function SL is available in diameters from 13" through 24", with width and offset specified per build order. The 5-spoke Super Light architecture delivers maximum inter-spoke airflow and a high-concave 5-spoke competition profile in the SL programme's lightest material configuration, with additional material removed between spokes compared to the standard CS variant to achieve the weight reduction that defines the SL programme.
| Diameter | Width Range | Typical Application |
|---|---|---|
| 18" | 8.5" – 10.5" | Sports coupes, track-day builds |
| 19" | 8.5" – 11.5" | Porsche 911, Audi R8, BMW M3/M4 |
| 20" | 9.0" – 12.5" | Ferrari 458/488, McLaren 570S, Nissan GT-R |
| 21" | 9.5" – 13.0" | Lamborghini Huracán, Mercedes-AMG GT-R |
| 22" | 10.0" – 13.5" | Widebody builds, luxury performance SUVs |
| 24" | 10.0" – 14.0" | High-offset luxury and SUV configurations |
All ADV005 Track Function SL sets are produced as build-to-order units. Contact the Hodoor team for a fitment consultation tailored to your vehicle platform and performance objectives.
Technical Specifications — ADV.1 ADV005 Track Function SL
The ADV005 Track Function SL is a 3-piece forged wheel occupying ADV.1's highest tier of unsprung mass reduction within the Track Function programme. The SL (Super Light) designation indicates that additional machining passes have been applied to remove material from the inter-spoke areas — reducing wheel weight beyond the already-optimised CS variant while maintaining the functional spoke channels that direct airflow to brake assemblies. Every gramme removed from the unsprung mass at the wheel reduces the energy required to accelerate and decelerate the rotating assembly, producing a cumulative improvement in acceleration response, braking performance, and steering feel that can be felt at the vehicle level.
Construction: 3-Piece Forged (Outer Barrel + Inner Barrel + Centre Disc)
Material: 6061-T6 aerospace aluminium alloy
Spoke Count: 5
Series: Super Light (SL) — additional inter-spoke material removal for reduced unsprung mass
Hardware: Titanium centre bolts (standard)
Balance: Computer-balanced post-assembly
Certification: Engineered to DOT and ECE structural standards
The 3-piece construction allows each component to be manufactured from optimally sized forgings, then assembled into the final wheel — enabling the precise SL machining passes to be applied to the centre disc without affecting the barrel geometry or assembly tolerances.
Track Function SL Design Philosophy
The Super Light programme within the Track Function series represents ADV.1's response to the performance requirements of drivers and teams who need not only the thermal management benefits of functional spoke geometry but also the lowest achievable wheel weight within a street-legal 3-piece forged platform. The SL removes material from areas of the centre disc that do not contribute to structural integrity under the load cases ADV.1 engineering models — inter-spoke pockets, spoke root fillets, and barrel-to-face transitions — while maintaining the critical structural cross-sections that carry hub, lateral, and braking loads.
The ADV005 Track Function SL's 5-spoke configuration in SL trim represents one of ADV.1's lightest 3-piece forged options within the Track Function programme. The weight differential between CS and SL variants depends on diameter and width, but SL models typically achieve a meaningful reduction in unsprung mass compared to CS equivalents at the same specification.
For drivers who participate in track events where scrutineering weight limits apply, or who seek the maximum performance benefit from reduced rotating mass, the SL series is the appropriate choice within the Track Function programme.
Wheel Finish Options — ADV005 Track Function SL
The ADV005 Track Function SL is available across ADV.1's full custom finish portfolio. The SL's additional inter-spoke machining creates deeper channels and pocket areas that respond differently to finish treatments compared to the CS — directional brushed finishes on the SL produce more pronounced shadow and highlight contrast across the spoke face, as the additional material removal creates a more complex three-dimensional surface.
Brushed Polished Aluminum: The SL's deeper spoke pockets make brushed polished finishes particularly effective — the polished surface catches light across a wider range of angles as the spoke geometry is more complex, and the deeper channels create more pronounced shadow contrast.
Gloss or Satin Black: Solid finishes de-emphasise the individual spoke sections while the SL's deeper channel profile creates subtle three-dimensional shadow effects visible at close range. The overall impression is of a dense, functional wheel face with visible structural complexity.
Full Custom: Any finish colour or treatment is available through ADV.1's Custom Forged Build Program. Contact the Hodoor team to discuss bespoke finish options for your build.
ADV.1 ADV005 Track Function SL — Watch It in Action
The ADV005 Track Function SL has been documented across a range of high-performance platforms in ADV.1's production build photography and video archive. The SL's additional material removal creates distinctive visual depth that is best appreciated in close-range photography and in-person viewing — motion content from ADV.1's media library captures the 5-spoke SL profile's rotational characteristics at speed.
Visit the ADV.1 Wheels YouTube channel for build showcases. The Hodoor gallery for this listing features curated production photography from ADV.1's approved archive.
Vehicle Fitment — ADV005 Track Function SL Series
The ADV005 Track Function SL is the appropriate choice for drivers and builds where maximum unsprung mass reduction within a 3-piece forged platform is a performance priority — track-focused street vehicles, competition vehicles used in events with weight considerations, and builds where the performance character of reduced rotational mass translates directly into a measurably different driving experience.
Porsche 911 (991/992): The 5-spoke Track Function profile suits the 911's circular rear quarter panel geometry particularly well. In 20"×10.5" to 20"×12" rear widths, the open 5-spoke face fills the standard 911 rear arch with a proportional, competition-inspired presence.
Ferrari and McLaren platforms: On mid-engine vehicles like the Ferrari 488/F8 and McLaren 570S/720S, the 5-spoke Track Function geometry creates strong visual impact from the rear three-quarter view where the arch cutout frames the open spoke face most dramatically.
Track-day vehicles: The 5-spoke architecture is a structurally efficient configuration that maintains high lateral stiffness while minimising material. For vehicles used in track environments, the open spoke face also facilitates brake inspection without wheel removal.
Contact the Hodoor team with your vehicle specification for precise offset, width, and bolt pattern recommendations for the ADV005 Track Function SL.
Compatible Bolt Patterns — ADV005 Track Function SL
- 5×112 — Mercedes-Benz AMG GT / C63 / E63, Audi R8, Lamborghini Urus, Porsche Cayenne
- 5×114.3 — Nissan GT-R, Acura NSX, Lexus LC-500 / RC-F, Ford Mustang GT500
- 5×120 — BMW M2 / M3 / M4, Ferrari 458/488 (select variants)
- 5×130 — Porsche 911 (991/992), Panamera, Cayenne GTS
- 5×108 — Aston Martin Vantage / DB11, Jaguar F-Type SVR
- Center bore: Machined to exact vehicle hub diameter per order specification
Additional bolt patterns available on request. Contact the Hodoor team to confirm availability for your specific PCD requirement.
ADV.1 Track Function SL Series — CS vs SL Comparison
| Variant | Spokes | vs CS Weight | Best For |
|---|---|---|---|
| ADV005 SL | 5 | Meaningful reduction | Competition 5-spoke, deep dish |
| ADV05 SL | 5 | Meaningful reduction | Track 5-spoke, balanced profile |
| ADV10 SL | 10 | Significant reduction | Italian supercars, McLarens |
| ADV10.0 SL | 10 | Significant reduction | Track-day & road performance |
| ADV5.0 SL | 5 | Meaningful reduction | 5-spoke track variant |
| ADV8R SL | 8 | Significant reduction | Race-inspired 8-spoke track builds |
Explore the Full ADV.1 Track Function SL Series Lineup
The Track Function SL Series offers the complete functional airflow-optimised spoke geometry in an ultra-light 3-piece forged configuration, spanning six distinct spoke architectures for the full range of high-performance vehicle platforms. All models share the same 3-piece forged construction, aerospace-grade 6061-T6 aluminium, and bespoke build-to-order workflow. Browse the complete SL lineup on Hodoor to compare models, explore finish options, and view gallery builds.
- ADV.1 ADV005 Track Function SL Series
- ADV.1 ADV05 Track Function SL Series
- ADV.1 ADV10 Track Function SL Series
- ADV.1 ADV10.0 Track Function SL Series
- ADV.1 ADV5.0 Track Function SL Series
- ADV.1 ADV8R Track Function SL Series
Frequently Asked Questions
What is the ADV.1 ADV005 Track Function SL Series?
The ADV005 Track Function SL is a 3-piece forged wheel from ADV.1's Track Function programme featuring spoke geometry engineered to direct airflow to brake assemblies, with additional inter-spoke material removal for reduced unsprung mass compared to the CS (Competition Series) variant.
What is the weight difference between SL and CS variants?
The SL achieves meaningful weight reduction over the CS through additional machining passes on the centre disc. Exact weight differential depends on diameter and width specification and is available from the Hodoor team upon request for your target configuration.
Are these wheels road-legal?
Yes. ADV.1 forged wheels are engineered to meet or exceed DOT and ECE safety standards and are designed for high-performance road use as well as track applications.
Can I run a staggered setup?
Yes. Staggered fitments are fully supported and commonly specified for the ADV005 Track Function SL on rear-wheel-drive platforms.
What is the production lead time?
Standard lead time is 10–14 weeks from confirmed order to dispatch. Contact the Hodoor team if your build has a specific completion deadline.
What warranty applies?
ADV.1 provides a limited structural warranty covering manufacturing defects under normal use. Full warranty terms are provided at point of purchase.
ADV.1 Custom Forged Build Program
Every ADV.1 Track Function Series wheel is manufactured to order. Diameter, width, offset, centre bore, bolt pattern, and finish are all specified individually for each build — allowing the wheel to be engineered precisely for your vehicle's hub geometry, brake clearance, and arch clearance requirements. The build program serves professional race teams, international auto show exhibitors, private collectors, and performance enthusiasts who require something beyond off-the-shelf options. To initiate a custom build consultation, contact the Hodoor team via the enquiry form on this product page.
How to Order ADV.1 Track Function Wheels Through Hodoor
Step 1 — Consultation: Contact the Hodoor team with your vehicle make, model, year, current tyre size, and preferred finish. Flag any fitment variables — wide-arch bodywork, air suspension, big brake kits, and staggered tyre setups all affect offset and width recommendations. Email [email protected] or call/WhatsApp +44 748 881 8747.
Step 2 — Configuration: Specify your exact build parameters: diameter (13" through 24"), width, offset, hub bore, bolt pattern, and finish. Custom engravings and hardware finishes are available on request.
Step 3 — Production: Your order enters the ADV.1 production queue. All wheels are manufactured from scratch as build-to-order units. Lead time is typically 10–14 weeks from confirmed order.
Step 4 — Inspection and Shipment: Each set undergoes dimensional verification, balance confirmation, and finish inspection before crating for international or domestic shipment.
Discover ADV.1 Wheels on Hodoor
Hodoor is the dedicated platform for premium forged wheel brands, connecting performance enthusiasts with world-class manufacturers including ADV.1, HRE, Brixton Forged, Vossen, and more. Every listing on Hodoor is curated by brand specialists who verify fitment data, source factory-approved imagery, and maintain up-to-date specification sheets. Browse the complete ADV.1 Track Function Series on Hodoor, compare models, explore finish options, and access our concierge ordering team when you are ready to configure your build. Visit hodoor.world to explore the full catalogue. Reach our team at [email protected] or +44 748 881 8747.
Wheel Care & Maintenance
ADV.1 forged wheels require straightforward maintenance to preserve finish quality and structural integrity over years of use. Use a pH-neutral, non-abrasive wheel cleaner and avoid aggressive alkaline cleaners. Rinse thoroughly after brake dust treatment to prevent residue accumulation in spoke channels. Dry with a clean microfibre towel after washing. Apply a dedicated wheel sealant or ceramic coating to the outer face and barrel at least twice per year. Inspect centre bolts and spoke fasteners annually. After any track session, inspect all four wheels for impact marks, stress cracks at spoke roots, or lateral deformation — structural damage requires immediate withdrawal from service.
International Delivery & Fitment
ADV.1 wheels are manufactured in the United States and shipped worldwide through Hodoor's international logistics network. All international shipments are fully insured and professionally crated. Customs documentation is prepared by Hodoor's export team. Import duties and VAT in the destination country are the responsibility of the customer. Hodoor will advise on estimated duty rates during the ordering process. Contact the Hodoor team to discuss logistics and fitment arrangements for your location.
