ADV.1 ADV10.2 Track Spec Advanced Series

Available Sizes — ADV.1 ADV10.2 Track Spec Advanced Series

The ADV10.2 is available in diameters from 13" through 24", with width and offset specified per build. While particularly well-matched to the Chevrolet C8 Corvette platform, the ADV10.2 is a universal Track Spec design available for any high-performance vehicle.

All configurations are produced as build-to-order units. Contact the Hodoor team for vehicle-specific offset and width recommendations.

Technical Specifications — ADV.1 ADV10.2

The ADV10.2 is a 3-piece forged 10-spoke variant in the ADV10 family, developed as an evolved specification that refines the spoke geometry of the base ADV10 with a revised centre disc profile. The .2 designation indicates a second-generation spoke architecture with updated proportions and enhanced fitment compatibility for modern mid-engine sports car platforms.

Construction: 3-Piece Forged (Outer + Inner Barrel + Centre Disc)
Material: 6061-T6 aerospace aluminium alloy
Spoke Count: 10
Hardware: Titanium centre bolts (standard)
Balance: Computer-balanced post-assembly
Certification: Engineered to DOT and ECE structural standards

The revised spoke geometry of the ADV10.2 addresses specific fitment and visual optimisation goals for mid-engine vehicles with wide, low profiles. The C8 Corvette Stingray — a key platform for the ADV10.2 — requires precise spoke geometry to achieve clean brake clearance at the inboard face while maintaining the visible depth of the outer concave profile. The ADV10.2's revised spoke root profile addresses these requirements without compromising the wheel's visual character.

Wheel Finish Options — ADV10.2

The ADV10.2 is available in three primary production finishes alongside full custom options through the ADV.1 Custom Forged Build Program.

Gloss Brushed Aluminum: A directional brushed surface on natural aluminium alloy with gloss clear protection. The ADV10.2's 10 spoke faces create a particularly rich light-catching pattern in this finish, visible clearly through the C8 Corvette's wide rear haunches. Natural aluminium pairs well with the Corvette's full range of factory exterior colours.

Matte Black: A flat matte black finish for blacked-out, aggressive builds. Particularly effective on darker C8 Corvette colour options — Shadow Metallic, Black Rose Metallic — where the wheel's matte black tone creates visual harmony with the vehicle's dark exterior.

Matte Bronze: A warm copper-tone matte finish that creates a high-contrast statement against the C8 Corvette's lighter exterior colours (Arctic White, Ceramic Matrix Gray, Rapid Blue) and a sophisticated warm accent against darker factory colours.

ADV10.2 Track Spec — Watch It in Action

The ADV10.2 has been documented extensively on the Chevrolet C8 Corvette — a platform that ADV.1 has worked with closely since the C8's introduction in 2019. The C8's mid-engine layout and wide, flared bodywork create a compelling showcase for the ADV10.2's 10-spoke face.

Visit the ADV.1 Wheels YouTube channel for ADV10.2 build content. The Hodoor gallery includes photography from production builds in multiple finish configurations.

Vehicle Fitment — ADV10.2 Track Spec Advanced Series

The ADV10.2 has established a particularly strong presence on the Chevrolet C8 Corvette platform, where the revised spoke geometry has been optimised for the car's brake component clearance requirements and visual proportions.

Chevrolet C8 Corvette Stingray: The ADV10.2's primary documented application. The C8 Corvette introduced a mid-engine layout for the first time in the model's production history, bringing with it wider rear haunches and a dramatically improved platform for large-diameter wheel fitments. The ADV10.2 on the C8 Corvette is documented in the brushed polished finish in the Drive gallery, showcasing how the wheel's 10-spoke face fills the car's substantial rear arch opening cleanly. The Corvette's 5×120 bolt pattern and specific hub bore requirements are among the ADV10.2's most precisely engineered configurations.

American muscle and GT cars: Beyond the C8, the ADV10.2's revised spoke geometry suits other American performance platforms — the Ford GT (Mk II), Dodge Viper ACR, and Ford Mustang Shelby GT500 — as well as European GT cars including the Porsche 911 GT3 and Mercedes-AMG GT63 S. The 10-spoke profile creates a visually active face at speed that is equally at home on aggressive American muscle and sophisticated European GTs.

Contact the Hodoor team for precise offset and width specifications for your C8 Corvette or other performance vehicle platform.

Compatible Bolt Patterns — ADV10.2

• 5×112 — Mercedes-Benz AMG GT / C63 / E63, Audi R8, Lamborghini Urus, Porsche Cayenne
• 5×114.3 — Nissan GT-R, Acura NSX, Lexus LC-500 / RC-F, Ford Mustang GT500
• 5×120 — BMW M2 / M3 / M4, Ferrari 458/488 (select variants)
• 5×130 — Porsche 911 (991/992), Panamera, Cayenne GTS
• 5×108 — Aston Martin Vantage / DB11, Jaguar F-Type SVR
• Center bore: Machined to exact vehicle hub diameter per order specification

ADV10.2 vs. ADV10 Family

Explore the Full ADV.1 Track Spec Advanced Series Lineup

The Track Spec Advanced Series is ADV.1's most comprehensive forged wheel program, spanning over a dozen distinct spoke architectures engineered for the world's most demanding supercars, high-performance coupes, and widebody builds. Each model shares the same 3-piece forged construction, aerospace-grade 6061-T6 aluminium, and bespoke build-to-order workflow — while offering a unique visual identity through its spoke geometry, concave depth, and finish palette.

Browse the complete lineup on Hodoor to compare spoke counts, explore finish options, and view gallery builds across different vehicle platforms.

• ADV5 Track Spec Advanced Series
• ADV5.0F Track Spec Advanced Series
• ADV5.2 Track Spec Advanced Series
• ADV05 Track Spec Advanced Series
• ADV05D Track Spec Advanced Series
• ADV05F Track Spec Advanced Series
• ADV005F Track Spec Advanced Series
• ADV006 Track Spec Advanced Series
• ADV7 Track Spec Advanced Series
• ADV10 Track Spec Advanced Series
• ADV10.0 Track Spec Advanced Series
• ADV10.2 Track Spec Advanced Series
• ADV10RF Track Spec Advanced Series
• ADV510 Track Spec Advanced Series

ADV.1 Custom Forged Build Program

Every ADV.1 Track Spec Advanced Series wheel is manufactured to order. Diameter, width, offset, centre bore, bolt pattern, and finish are all specified individually for each build — allowing the wheel to be engineered precisely for your vehicle's hub geometry, brake clearance, and arch clearance requirements. This is not a catalogue product; it is a precision-manufactured component produced from a raw forging to your exact parameters.

The build program serves professional race teams, international auto show exhibitors, private collectors, and performance enthusiasts who require something beyond off-the-shelf options. The same manufacturing capabilities available to those clients are accessible to any customer ordering through Hodoor's concierge service. Enquiries are managed individually, with dedicated support from specification through final inspection, shipping, and fitment coordination.

To initiate a custom build consultation, contact the Hodoor team via the enquiry form on this product page. Lead times and configuration minimums will be confirmed by our team during your initial consultation session.

How to Order ADV.1 Wheels Through Hodoor

Ordering forged wheels through Hodoor is a fully guided experience. Our team works with you through every stage — from initial fitment consultation through configuration, production, and delivery — so that what arrives at your door is exactly what you specified, sized perfectly for your car, and finished to showroom standard.

Step 1 — Consultation: Contact the Hodoor team with your vehicle make, model, year, current tyre size, and preferred finish. Flag any fitment variables at this stage — wide-arch bodywork, air suspension, big brake kits, and staggered tyre setups all affect offset and width recommendations. Our specialists will cross-reference fitment data to confirm the correct configuration before anything enters production.

Step 2 — Configuration: Once fitment is confirmed, you specify your exact build parameters: diameter (13" through 24"), width, offset, hub bore, bolt pattern, and finish. Custom engravings and hardware finishes are available on request at this stage.

Step 3 — Production: Your order enters the ADV.1 production queue. All wheels are manufactured from scratch as build-to-order units. Lead time is typically 10–14 weeks from confirmed order, depending on current scheduling and finish complexity.

Step 4 — Inspection and Shipment: Each set undergoes dimensional verification, balance confirmation, and finish inspection before crating for international or domestic shipment. Hodoor coordinates delivery to your door or nominated fitment centre.

Frequently Asked Questions

Are these wheels road-legal?
Yes. ADV.1 forged wheels are engineered to meet or exceed DOT and ECE safety standards and are designed for high-performance road use as well as track applications. Verify local regulations for your specific jurisdiction and vehicle class.

How do these compare to OEM weight?
As a 3-piece forged wheel, the Track Spec Advanced Series typically delivers a meaningful reduction in unsprung mass versus OEM cast aluminium wheels of equivalent diameter. Precise weight data for your target configuration is available from the Hodoor team upon request.

Can I run a staggered setup?
Yes. Staggered fitments — wider rear, narrower front — are supported and commonly used on rear-wheel-drive platforms including Porsche 911, Ferrari 488, McLaren 570S/720S, and Lamborghini Huracán. ADV.1 produces front and rear sets with different widths and offsets as a single matched order.

What is the production lead time?
Standard lead time is 10–14 weeks from confirmed order to dispatch. Expedited production may be available — contact the Hodoor team if your build has a specific completion deadline.

What warranty applies?
ADV.1 provides a limited structural warranty covering manufacturing defects under normal use. The warranty does not cover impact damage, kerb strikes, or damage from incorrect fitment. Full warranty terms are provided at point of purchase.

Discover ADV.1 Wheels on Hodoor

Hodoor is the dedicated platform for premium forged wheel brands, connecting performance enthusiasts with world-class manufacturers including ADV.1, HRE, Brixton Forged, Vossen, and more. Every listing on Hodoor is curated by brand specialists who verify fitment data, source factory-approved imagery, and maintain up-to-date specification sheets.

Browse the complete ADV.1 Track Spec Advanced Series on Hodoor, compare models, explore finish options, and access our concierge ordering team when you are ready to configure your build. Visit hodoor.world to explore the full catalogue.

Wheel Care & Maintenance

ADV.1 forged wheels require straightforward maintenance to preserve finish quality and structural integrity over years of use.

Cleaning: Use a pH-neutral, non-abrasive wheel cleaner. Avoid aggressive alkaline cleaners and prolonged-contact iron removers. High-pressure jets aimed directly at barrel seams should also be avoided. Rinse thoroughly after brake dust treatment to prevent residue accumulation in spoke channels.

Drying: Dry with a clean microfibre towel after washing. Standing water in spoke channels can accelerate surface oxidation on brushed or anodised finishes, particularly in humid climates or coastal environments.

Protection: Apply a dedicated wheel sealant or ceramic coating to outer face and barrel at least twice per year, or more frequently if the vehicle is operated in wet or road-salted conditions. Matte and brushed finishes are more porous than gloss clear-coated surfaces and benefit most from regular protection.

Hardware: Inspect centre bolts and spoke fasteners annually. ADV.1 titanium hardware is corrosion-resistant, but any loose fasteners should be addressed by a qualified wheel specialist using the torque values provided in your wheel documentation.

After track use: Inspect all four wheels for impact marks, stress cracks at spoke roots, or lateral deformation after any track session. Mild surface kerbing can often be repaired by an ADV.1 authorised refurbisher; structural damage requires immediate withdrawal from service.

International Delivery & Fitment

ADV.1 wheels are manufactured in the United States and shipped worldwide through Hodoor's international logistics network. All international shipments are fully insured and professionally crated. Customs documentation — commercial invoices, HS code classification — is prepared by Hodoor's export team.

Import duties and VAT in the destination country are the responsibility of the customer. Hodoor will advise on estimated duty rates during the ordering process; final determination is made by customs authorities at the point of entry. For UAE customers, a 5% import duty typically applies. EU customers should anticipate 20–25% import VAT on the declared customs value. Consult our team or your local customs authority for specifics.

Fitment can be arranged through Hodoor's network of recommended installation partners in major automotive markets. If you have a preferred tyre fitter, we can coordinate direct delivery to their premises with full documentation. Contact the Hodoor team to discuss logistics for your location.