ADV.1 ADV05 Track Spec Advanced Series

Available Sizes — ADV.1 ADV05 Track Spec Advanced Series

The ADV05 is available in diameters from 13" through 24", with width and offset configured individually per build. The table below shows the primary production range; custom configurations outside this range are available on consultation.

All ADV05 sets are produced as build-to-order units. ADV.1's engineering team accommodates custom offsets, hub bore adaptations, and non-standard width increments for air suspension systems, big brake kits, and wide-arch bodywork. Submit your vehicle specifications through the Hodoor enquiry form for a complimentary fitment consultation.

Technical Specifications — ADV.1 ADV05

The ADV05 is a 3-piece forged wheel constructed from aerospace-grade 6061-T6 aluminium. The outer barrel and inner barrel are each forged as a single piece, then CNC-machined to precise dimensional tolerances. The centre disc is forged separately and assembled using titanium hardware, enabling each component to be specified and finished independently.

Construction: 3-Piece Forged (Outer + Inner Barrel + Centre Disc)
Material: 6061-T6 aerospace aluminium alloy
Hardware: Titanium centre bolts (standard); chrome on request
Finish: Hand-polished inner barrel; outer face per selected finish
Balance: Computer-balanced post-assembly
Certification: Engineered to DOT and ECE structural standards

The 5-spoke architecture of the ADV05 is designed for aggressive concave profiling. Spokes are flow-formed to maximise the strength-to-weight ratio at the spoke root, where stress concentrations are highest under lateral loading. The result is a visually dramatic wheel that maintains full structural performance under hard braking, high-speed cornering, and sustained track use.

Wheel Finish Options — ADV05

ADV.1 offers an extensive finish palette for the ADV05. Each production finish is applied in-house at ADV.1's US manufacturing facility following multi-stage surface preparation and quality inspection. Custom colours and two-tone combinations are available through the Custom Forged Build Program.

Matte Black / Gold Lip: The ADV05's signature combination — seen on countless show builds and editorial features. The centre disc receives a deep matte black treatment while the outer lip is hand-polished to a warm gold tone, creating a sharp visual contrast that emphasises the concave profile. This finish is particularly effective on dark or carbon-wrapped exterior colours.

Gloss Brushed Aluminum: A directional brushed texture on the outer face, protected by a gloss clear coat for durability. The finish produces a dynamic shimmer effect as the wheel rotates and pairs well with silver, white, or light-coloured exterior paint.

Matte Bronze: A warm copper-toned matte finish with low surface reflectivity. Recommended for earth-toned vehicle wraps and factory bronze, green, or tan exterior colours. Especially durable when protected with a ceramic wheel coating.

Full Custom: ADV.1 matches any RAL, Pantone, or sample colour. Two-tone configurations, gradient effects, and colour-matched centre hardware are available on consultation.

ADV05 Track Spec — Watch It in Action

ADV.1 documents the ADV05 across a broad range of build environments — from private track days and canyon roads to international auto shows and studio photography sessions. The ADV05's deep concave profile translates exceptionally well on camera, particularly in the signature Matte Black / Gold Lip combination on dark-bodied vehicles.

Visit the ADV.1 Wheels YouTube channel for build documentation and manufacturing footage. The Hodoor gallery for this listing includes a curated selection of the most representative production builds.

Vehicle Fitment — ADV05 Track Spec Advanced Series

The ADV05's 3-piece construction allows precise offset and width customisation, making it suitable for vehicles ranging from compact sports coupes to wide-body modified supercars. The following builds represent documented ADV05 fitments.

Mercedes-AMG GT-R: One of the most-photographed ADV05 builds. The C190 AMG GT-R's wide rear haunches accommodate an aggressively wide rear setup, and the Matte Black / Gold Lip finish complements the car's angular exterior. The 21" x 12.5" rear configuration with a high-negative offset fills the arch to within millimetres of the bodywork, delivering the aggressive flush stance that defines the modern ADV.1 aesthetic.

Nissan GT-R (R35): A natural pairing — the GT-R's track heritage and the ADV05's motorsport-derived design language complement each other across a generation of iconic builds. The GT-R's staggered fitment requirement is addressed with different width and offset specifications per axle. Matte Black ADV05 sets on GT-R builds emphasise the car's aggressive character without detracting from its original design.

Lamborghini Gallardo / Superleggera: Multiple documented early ADV05 builds demonstrate the wheel's compatibility with mid-engine Italian supercar platforms. The Gallardo and Superleggera's lateral grip requirements make lightweight forged wheels a meaningful performance upgrade, and the ADV05's weight advantage over OEM options contributes to the car's handling precision.

Additional documented fitments include the BMW M3/M4 (F8x/G8x), Porsche 911 Turbo S (992), Ferrari 458 Italia, and Aston Martin V8 Vantage. Contact the Hodoor team to confirm offset and width specifications for your vehicle variant.

Compatible Bolt Patterns — ADV05

The ADV05 can be produced in any bolt pattern as a build-to-order wheel. Most commonly ordered configurations:

• 5×112 — Mercedes-Benz AMG GT / C63 / E63, Audi R8, Lamborghini Urus, Porsche Cayenne
• 5×114.3 — Nissan GT-R, Acura NSX, Ford Mustang Shelby GT500, Lexus LC-500 / RC-F
• 5×120 — BMW M2 / M3 / M4, Ferrari 458/488 (select variants)
• 5×130 — Porsche 911 (991/992 series), Panamera, Cayenne GTS
• 5×108 — Aston Martin Vantage / DB11, Jaguar F-Type SVR
• Center bore: Machined to exact vehicle hub diameter per order specification

ADV05 vs. Other Track Spec 5-Spoke Variants — At a Glance

Explore the Full ADV.1 Track Spec Advanced Series Lineup

The Track Spec Advanced Series is ADV.1's most comprehensive forged wheel program, spanning over a dozen distinct spoke architectures engineered for the world's most demanding supercars, high-performance coupes, and widebody builds. Each model shares the same 3-piece forged construction, aerospace-grade 6061-T6 aluminium, and bespoke build-to-order workflow — while offering a unique visual identity through its spoke geometry, concave depth, and finish palette.

Browse the complete lineup on Hodoor to compare spoke counts, explore finish options, and view gallery builds across different vehicle platforms.

• ADV5 Track Spec Advanced Series
• ADV5.0F Track Spec Advanced Series
• ADV5.2 Track Spec Advanced Series
• ADV05 Track Spec Advanced Series
• ADV05D Track Spec Advanced Series
• ADV05F Track Spec Advanced Series
• ADV005F Track Spec Advanced Series
• ADV006 Track Spec Advanced Series
• ADV7 Track Spec Advanced Series
• ADV10 Track Spec Advanced Series
• ADV10.0 Track Spec Advanced Series
• ADV10.2 Track Spec Advanced Series
• ADV10RF Track Spec Advanced Series
• ADV510 Track Spec Advanced Series

ADV.1 Custom Forged Build Program

Every ADV.1 Track Spec Advanced Series wheel is manufactured to order. Diameter, width, offset, centre bore, bolt pattern, and finish are all specified individually for each build — allowing the wheel to be engineered precisely for your vehicle's hub geometry, brake clearance, and arch clearance requirements. This is not a catalogue product; it is a precision-manufactured component produced from a raw forging to your exact parameters.

The build program serves professional race teams, international auto show exhibitors, private collectors, and performance enthusiasts who require something beyond off-the-shelf options. The same manufacturing capabilities available to those clients are accessible to any customer ordering through Hodoor's concierge service. Enquiries are managed individually, with dedicated support from specification through final inspection, shipping, and fitment coordination.

To initiate a custom build consultation, contact the Hodoor team via the enquiry form on this product page. Lead times and configuration minimums will be confirmed by our team during your initial consultation session.

How to Order ADV.1 Wheels Through Hodoor

Ordering forged wheels through Hodoor is a fully guided experience. Our team works with you through every stage — from initial fitment consultation through configuration, production, and delivery — so that what arrives at your door is exactly what you specified, sized perfectly for your car, and finished to showroom standard.

Step 1 — Consultation: Contact the Hodoor team with your vehicle make, model, year, current tyre size, and preferred finish. Flag any fitment variables at this stage — wide-arch bodywork, air suspension, big brake kits, and staggered tyre setups all affect offset and width recommendations. Our specialists will cross-reference fitment data to confirm the correct configuration before anything enters production.

Step 2 — Configuration: Once fitment is confirmed, you specify your exact build parameters: diameter (13" through 24"), width, offset, hub bore, bolt pattern, and finish. Custom engravings and hardware finishes are available on request at this stage.

Step 3 — Production: Your order enters the ADV.1 production queue. All wheels are manufactured from scratch as build-to-order units. Lead time is typically 10–14 weeks from confirmed order, depending on current scheduling and finish complexity.

Step 4 — Inspection and Shipment: Each set undergoes dimensional verification, balance confirmation, and finish inspection before crating for international or domestic shipment. Hodoor coordinates delivery to your door or nominated fitment centre.

Frequently Asked Questions

Are these wheels road-legal?
Yes. ADV.1 forged wheels are engineered to meet or exceed DOT and ECE safety standards and are designed for high-performance road use as well as track applications. Verify local regulations for your specific jurisdiction and vehicle class.

How do these compare to OEM weight?
As a 3-piece forged wheel, the Track Spec Advanced Series typically delivers a meaningful reduction in unsprung mass versus OEM cast aluminium wheels of equivalent diameter. Precise weight data for your target configuration is available from the Hodoor team upon request.

Can I run a staggered setup?
Yes. Staggered fitments — wider rear, narrower front — are supported and commonly used on rear-wheel-drive platforms including Porsche 911, Ferrari 488, McLaren 570S/720S, and Lamborghini Huracán. ADV.1 produces front and rear sets with different widths and offsets as a single matched order.

What is the production lead time?
Standard lead time is 10–14 weeks from confirmed order to dispatch. Expedited production may be available — contact the Hodoor team if your build has a specific completion deadline.

What warranty applies?
ADV.1 provides a limited structural warranty covering manufacturing defects under normal use. The warranty does not cover impact damage, kerb strikes, or damage from incorrect fitment. Full warranty terms are provided at point of purchase.

Discover ADV.1 Wheels on Hodoor

Hodoor is the dedicated platform for premium forged wheel brands, connecting performance enthusiasts with world-class manufacturers including ADV.1, HRE, Brixton Forged, Vossen, and more. Every listing on Hodoor is curated by brand specialists who verify fitment data, source factory-approved imagery, and maintain up-to-date specification sheets.

Browse the complete ADV.1 Track Spec Advanced Series on Hodoor, compare models, explore finish options, and access our concierge ordering team when you are ready to configure your build. Visit hodoor.world to explore the full catalogue.

Wheel Care & Maintenance

ADV.1 forged wheels require straightforward maintenance to preserve finish quality and structural integrity over years of use.

Cleaning: Use a pH-neutral, non-abrasive wheel cleaner. Avoid aggressive alkaline cleaners and prolonged-contact iron removers. High-pressure jets aimed directly at barrel seams should also be avoided. Rinse thoroughly after brake dust treatment to prevent residue accumulation in spoke channels.

Drying: Dry with a clean microfibre towel after washing. Standing water in spoke channels can accelerate surface oxidation on brushed or anodised finishes, particularly in humid climates or coastal environments.

Protection: Apply a dedicated wheel sealant or ceramic coating to outer face and barrel at least twice per year, or more frequently if the vehicle is operated in wet or road-salted conditions. Matte and brushed finishes are more porous than gloss clear-coated surfaces and benefit most from regular protection.

Hardware: Inspect centre bolts and spoke fasteners annually. ADV.1 titanium hardware is corrosion-resistant, but any loose fasteners should be addressed by a qualified wheel specialist using the torque values provided in your wheel documentation.

After track use: Inspect all four wheels for impact marks, stress cracks at spoke roots, or lateral deformation after any track session. Mild surface kerbing can often be repaired by an ADV.1 authorised refurbisher; structural damage requires immediate withdrawal from service.

International Delivery & Fitment

ADV.1 wheels are manufactured in the United States and shipped worldwide through Hodoor's international logistics network. All international shipments are fully insured and professionally crated. Customs documentation — commercial invoices, HS code classification — is prepared by Hodoor's export team.

Import duties and VAT in the destination country are the responsibility of the customer. Hodoor will advise on estimated duty rates during the ordering process; final determination is made by customs authorities at the point of entry. For UAE customers, a 5% import duty typically applies. EU customers should anticipate 20–25% import VAT on the declared customs value. Consult our team or your local customs authority for specifics.

Fitment can be arranged through Hodoor's network of recommended installation partners in major automotive markets. If you have a preferred tyre fitter, we can coordinate direct delivery to their premises with full documentation. Contact the Hodoor team to discuss logistics for your location.