ANRKY RS1.3C RetroSeries 2-Piece Carbon Forged Wheels

Anrky RS1.3C — RetroSeries Carbon 1-Piece Forged Wheel

The ANRKY RS1.3C is a monoblock forged wheel from the RetroSeries Carbon sub-family — ANRKY's highest-expression, single-piece interpretation of the RS1 spoke design. The RS1.3C features a five-spoke concave face with polished barrel faces and sharply machined channels between each spoke — the foundational RetroSeries geometry translated into a concave profile, machined from a single 6061-T6 aerospace-grade forged aluminum billet and finished with a carbon fiber accent center cap and hardware. As a monoblock design, the RS1.3C eliminates all barrel joints and seam hardware — producing the cleanest possible outer face and the lowest relative wheel mass in the RS1 family. Engineered and finished entirely in the U.S.A., every wheel is built to the exact diameter, width, and offset of the ordering vehicle.

The Carbon designation in the RS1.3C denotes both the carbon fiber accent finishing and the monoblock construction philosophy — this is ANRKY's build-to-the-limit interpretation of the RS1 design for drivers who want maximum structural rigidity and the cleanest aesthetic without the hardware exposure of a multi-piece assembly.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 7.0" – 14.0"
• Construction: Monoblock forged — single-piece machined from 6061-T6 aerospace aluminum billet, no barrel joints
• PCD options: 5x108, 5x112, 5x114.3, 5x120, 5x130, 5x150, and fully custom — Centerlock available for Lamborghini, Ferrari, and Porsche GT3/Turbo S
• Offset (ET): fully made-to-order — any ET calculated to clear your brake setup and fender line precisely

Recommended fitment note: ANRKY builds every RS1.3C to vehicle specification. Provide your make, model, year, brake package, and target stance — the technical team confirms the optimal configuration within 24 hours.

Need a Different Size or Configuration?

The RS1.3C is produced in any diameter from 13" to 24" and widths from 7.0" to 14.0". Any bolt pattern and any ET are achievable without special tooling. Contact [email protected] or WhatsApp with your vehicle details. For a fully custom spoke design, explore our AI Wheel Design Service.

Technical Specifications

• Manufacturing: Monoblock forged construction — single-piece machined billet, no barrel joints or seam hardware
• Material: 6061-T6 heat-treated aerospace-grade forged aluminum
• Series: RetroSeries Carbon (1-Piece Monoblock)
• Available Widths: 7.0" – 14.0"
• Accent: Carbon fiber center cap and hardware accents
• Centerlock: Available on request for Lamborghini, Ferrari, and Porsche GT3 / Turbo S applications
• Weight: Optimised per application — manufactured to vehicle load and G.A.W.R. specification
• Certification: Manufactured to TÜV Standard
• Origin: Engineered, machined, and finished in the U.S.A.
• Build lead time: 6–10 weeks from order confirmation

Vehicle Fitment Guide

The RS1.3C's monoblock construction and carbon fiber accents make it the natural choice for track-oriented builds and minimalist supercar fitments where hardware exposure and barrel seam lines are unwanted. The one-piece forging provides maximum torsional rigidity for high-downforce applications.

• Lamborghini (Huracán, Aventador): 20–21" diameter, width 9.0–11.0"; Centerlock available for LP and Performante variants
• Ferrari (488, F8, 296 GTB, SF90, Roma): 20–21" recommended, width 9.0–11.0"; Centerlock for GT3/Challenge variants
• Porsche (992 GT3, 992 Turbo S, 718 Cayman GT4): 20" for GT3 track use; Centerlock available; monoblock suits Porsche's weight-reduction philosophy
• McLaren (720S, 750S, 765LT, Senna): 19–20" front / 20–21" rear; monoblock weight advantage suits McLaren's lightweight chassis
• BMW M (M3, M4, M2, M5): 19–20" with 5x112; CSL-spec builds often prefer monoblock for reduced unsprung mass
• Mercedes-Benz AMG (C63, E63, GT Black Series): 19–21" with 5x112; Black Series and track builds benefit from monoblock rigidity

Contact [email protected] for fitment enquiries on modified platforms or unusual bolt patterns.

Other Bolt Patterns Available

The RS1.3C is produced in any bolt pattern. Regularly manufactured patterns include 5x108 (Ford GT, Aston Martin), 5x112 (BMW, Mercedes, Audi, Lamborghini Urus), 5x114.3 (Nissan GT-R, Honda NSX, Ford Mustang), 5x120 (BMW M-series, Range Rover), 5x130 (Porsche, Bentley), and 5x150 (Lexus LX, Land Cruiser). Centerlock drilling for Ferrari, Lamborghini, and Porsche GT3 is also available. Contact [email protected].

RS1.3C Compared to the RS1 Family

The RS1.3C is the monoblock summit of the RS1 family — same spoke design, same RetroSeries DNA, maximum structural integrity and the cleanest possible outer face.

Explore the RetroSeries Carbon Lineup

Browse available RetroSeries Carbon models through Hodoor World:

• Anrky RS2.3C Carbon Monoblock
• Anrky RS3.3C Carbon Monoblock
• Anrky RS4.3C Carbon Monoblock
• Anrky RS5.3C Carbon Monoblock
• Anrky RS6.3C Carbon Monoblock
• Anrky RS7.3C Carbon Monoblock
• Anrky RS1.3C Carbon (you are here)

For the 2-piece concave variant, see RS1.2. For the 3-piece concave with step lip, see RS1.3. For the flat-face classic, see RS1.

Custom Forged Options

Every RS1.3C is a made-to-order forging — no stock sizes, no off-the-shelf inventory. ANRKY's U.S. facility machines each wheel from raw billet aluminum to the exact dimensions for your vehicle. Custom carbon fiber color tints, bespoke surface finishes, and non-standard bolt patterns are all supported.

Available finishes include Gloss Black, Matte Black, Brushed Clear, Brushed Bronze, Polished, Hyper Silver, and fully custom RAL or two-tone combinations. Contact [email protected] or explore the AI Wheel Design Service.

How to Order the Anrky RS1.3C

1. Send your vehicle details: Make, model, year, trim, brake package, and target stance. Email [email protected] or use WhatsApp.
2. Fitment confirmation: Hodoor World confirms exact diameter, width, offset, and bolt pattern within 24 hours.
3. Finish and accent selection: Choose your monoblock finish and carbon fiber accent colour.
4. Production order: Proforma invoice issued after confirmation. Production begins on deposit — standard lead time 6–10 weeks.
5. Shipping: Hodoor World manages global export logistics and customs documentation.

Contact [email protected] or visit our Trustpilot page.

Frequently Asked Questions — Anrky RS1.3C

Is the RS1.3C a monoblock (1-piece) wheel?
Yes. The RS1.3C is machined from a single 6061-T6 aluminum forging — there are no barrel joints, seam hardware, or multi-piece assembly. This is a true monoblock design.

What does the .3C designation mean?
The .3C suffix designates the Carbon monoblock variant within the RS1 family. It combines the deep concave profile of the .3 sub-family with monoblock construction and carbon fiber accents — the highest-performance variant in the RS1 lineup.

How long does production take?
Standard lead time is 6–10 weeks from order confirmation. Hodoor World will confirm your specific timeline at order placement.

Can I order just two wheels?
Yes — ANRKY builds to order by the piece. Front pair, rear pair, or a full set of four are all available.

Discover Hodoor World

Hodoor World is a specialist forged wheel retailer with global shipping and a dedicated fitment team. Our catalogue spans all major forged wheel brands and construction types.

• AI Wheel Design Service — Preview your custom wheel before ordering
• Custom Forged Wheel Manufacturing Guide
• Browse the full forged wheel catalogue at hodoor.world
• Hodoor World on Trustpilot — verified customer reviews

Browse our full catalogue at Hodoor World Custom Wheels, or visit hodoor.world.

Wheel Care — Anrky RS1.3C Maintenance

The monoblock construction eliminates barrel seam maintenance, but the finish and carbon fiber accents still benefit from regular care. A well-maintained monoblock wheel holds its finish indefinitely — the key is avoiding harsh chemicals and keeping brake dust off the surface between washes.

• Wash weekly with a pH-neutral wheel cleaner and a soft microfibre brush. Avoid acidic or alkaline products.
• Rinse thoroughly after salted roads. Dry completely to prevent water spots on polished or machined surfaces.
• Clean carbon fiber center caps gently — use a dedicated carbon fiber cleaner; avoid abrasives or solvent-based products that can lift the carbon weave's resin coating.
• Apply a wheel sealant every 3–6 months to protect the monoblock finish against brake dust, road tar, and UV exposure. Ceramic-based sealants provide the longest protection interval.
• Inspect lug seat contact surfaces annually — ensure lug nuts are torqued to specification with a calibrated torque wrench. Monoblock lug seats are machined surfaces; over-torquing can crack the seat.
• For refinishing or accent replacement, contact [email protected] — ANRKY provides refinish support for wheels in their original build records.

Avoid pressure washing directly at lug holes or valve stems. Use a dedicated brush for cleaning between the spokes — the RS1.3C's concave spoke profile traps brake dust and road grime in the spoke windows; flushing thoroughly at each wash prevents staining.

Anrky RS1.3C — International Delivery

Hodoor World ships ANRKY RS1.3C wheels worldwide. We handle customs documentation, export paperwork, and carrier selection to ensure your forged wheels arrive safely. Standard lead time is 6–10 weeks from order confirmation; shipping transit adds 3–10 business days. Contact [email protected] or WhatsApp for a shipping quote.