AI Generated Custom Forged Wheels Design for Ferrari Purosangue by Bête Noire Ver1.7
Custom Forged Wheels for Ferrari Purosangue -- B-te Noire Ver1.7
When Ferrari priced the Purosangue above the 812 Superfast, they were making a point: this is not a compromise vehicle. It is a V12 Ferrari that happens to have four doors and four proper seats. The wheel choice should reflect that positioning. The B-te Noire Ver1.7 is a cross-spoke forged monoblock with aggressive concavity -- a design that says performance first, without apology. On the Purosangue's broad flanks, it transforms the side profile from handsome to arresting.
The cross-spoke pattern layers two sets of spokes at different depths, creating a lattice effect when viewed from an angle. Straight on, the primary spokes dominate; from the side, the secondary spokes appear behind them, adding complexity that rewards a second look. Each wheel is CNC-machined from 6061-T6 forged aluminium billet, reducing weight by approximately 30% compared to a cast wheel of the same dimensions. For the Purosangue's sophisticated active suspension, every kilogram of unsprung mass removed translates to better body control and more precise damping response.
Fitment Specifications
| Bolt pattern | 5x114.3 |
| Recommended diameter | 20" or 22" |
| Width range | 9.5J front / 11.5J rear (staggered) |
| Offset range | ET30 -- ET50 |
| Centre bore | 67.1 mm |
| Material | 6061-T6 forged aluminium |
| Weight | ~30% lighter than equivalent cast wheel |
The staggered configuration matches the Purosangue's factory setup. Both diameters clear the CCM brake package without spacers. For more detail on how wheel size interacts with tyre choice and ride quality, see our wheel sizing guide.
How AI Wheel Design Works
The Ver1.7 was produced by Hodoor's AI wheel design programme. The system generates over 1,000 concepts per day, each validated for forged monoblock manufacturability. Design is complimentary; costs begin at CNC production.
Available Finishes
- Gloss black
- Satin black
- Brushed titanium
- Polished aluminium
- Custom RAL colour matching (any colour, applied with ceramic clear coat)
Frequently Asked Questions
Is the cross-spoke pattern more fragile than a simple five-spoke?
No. The cross-spoke layering actually distributes impact forces across more contact points than a conventional design. Combined with the inherent strength of forged 6061-T6 aluminium, the Ver1.7 exceeds the impact resistance of most aftermarket cast wheels. See our forged wheels guide for the engineering details.
Can I use these wheels with winter tyres?
Yes. Many Purosangue owners order a second set of Ver1.7 wheels in a smaller diameter (20 inches) for winter use, paired with higher-profile winter tyres. The forged aluminium resists corrosion from road salt better than cast alternatives. Contact us for a winter setup recommendation.
How does the Ver1.7 differ from the Ver1.6?
The Ver1.6 uses a twin-spoke turbine pattern; the Ver1.7 uses overlapping cross-spokes. The Ver1.7 has slightly more aggressive concavity and a busier visual texture. Both share identical fitment specifications. Choose based on which design better matches your Purosangue's character -- our upgrade guide can help you decide.
Complete Your Build
Explore the Ferrari 296 wide body kit or browse the full AI wheels collection for more Purosangue options.
To order or request a custom variation, email [email protected] with your vehicle details.
