305 Forged UF308 Wheels

305 Forged UF308 — Precision Engineering from Miami

The 305 Forged UF308 addresses a specific visual challenge of contemporary electric vehicle platforms: the large unsprung mass and wider suspension packaging of modern EV architectures often creates a larger visual gap between the wheel face and the arch liner than on equivalent combustion-engine vehicles. The UF308 combats this with an outward-angled spoke face that fills this gap optically — spokes that angle toward the viewer appear to occupy more space than flat-face spokes of equivalent diameter.

Each of the eight spokes is angled outward at approximately 8 degrees from the wheel plane at the mid-radius — not visible as an angle but perceived as a spoke face that appears to come forward rather than recede. This convex face geometry also positions each spoke's face highlight line closer to the viewer, giving the UF308 a brighter, more reflective presence at normal viewing distances than a flat-face 8-spoke of comparable finish specification.

The UF308 is optimised for EV performance platforms — Tesla Model S Plaid, Porsche Taycan Turbo S, Audi e-tron GT RS — but works equally on combustion platforms where a visually forward face presence is preferred. BMW M5 and AMG S 63 builds regularly specify the UF308 for its ability to maintain wheel visual presence in wheel arches with significant clearance between face and arch liner.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 1-piece monoblock forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry
• Popular fitments: 20×10 ET25 for Tesla Model S Plaid, 21×10.5 ET38 for BMW M5 G90, 21×10 ET40 for Porsche Taycan Turbo S, 22×10.5 ET40 for Audi e-tron GT RS

Fitment note: Every UF308 is built around your specific vehicle. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Design Language & Engineering: UF308

The 8-degree outward spoke angle in the UF308 is measured at the spoke mid-radius. This angle creates a spoke face profile that is technically a frustum — a truncated cone section — rather than a flat face. The spoke face at the rim is positioned approximately 12mm forward of the barrel plane, while at the hub the face coincides with the standard barrel plane. This 12mm forward displacement is the source of the visual fullness that distinguishes the UF308 from conventional flat-face 8-spoke designs.

Eight spokes at 45-degree equal spacing provide the UF308's rotational symmetry. At 8 spokes the wheel face has no position where two adjacent spoke gaps align simultaneously with the typical 5-spoke caliper geometry — every rotation position shows at least one spoke partially covering each caliper leg. This consistent caliper coverage at every rotation angle is one reason 8-spoke flat designs are common on OEM specifications for performance EV brands, and the UF308 retains this property while adding the forward-volume face geometry.

Recommended Finishes for the UF308

Satin Hypersilver: Satin hypersilver — a lighter, more reflective silver than standard satin silver — is the most popular UF308 specification on Tesla Model S Plaid and Porsche Taycan platforms. The lighter silver tone references the clean-technology aesthetic of EV brands while the outward-angled spokes appear larger and more dynamic than equivalent flat-face wheels in this finish.

Gloss Black with White Spoke Tips: Gloss black on the spoke bodies and barrel with the outermost 25mm of each spoke near the barrel finished in gloss white — a specification associated with BMW M Motorsport liveries and with Tesla racing derivatives. The eight white spoke tips create an implied circle of highlights near the wheel's outer diameter.

Dark Matte Charcoal: Matte charcoal across the full face and barrel is the stealth specification for the UF308 — popular on AMG Night Package and BMW M Individual Frozen Black builds where the wheel should be present but not competing with the vehicle's body or with illuminated brake caliper highlights. The convex face geometry of the UF308 provides enough visual volume to maintain presence even under this subdued finish.

Technical Specifications

• Manufacturing: 1-piece monoblock forging — 6061-T6 aerospace billet forged under a 5,000-ton press and 5-axis CNC finish-machined to final spoke profile at 305 Forged's Miami facility
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF308 — 8-spoke with uniform radial layout and slight outward convex face angle creating forward visual volume
• Spoke count: 8 spokes
• Weight advantage: Monoblock construction typically 15–25% lighter than a cast equivalent; no barrel-to-face seam, no bolted hardware
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel colour
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Colour Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: PVD coatings, custom colour-matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70), iX
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63, GLS 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, e-tron GT RS
• Porsche: 911 (991/992), Cayenne, Panamera, Taycan
• Lamborghini: Huracán (EVO, STO, LP 640-4), Urus (Performante, S)
• Rolls-Royce & Bentley: Ghost (EWB), Phantom, Cullinan, Wraith; Continental GT Speed, Flying Spur, Bentayga (S, Speed, EWB)
• Ferrari: 812, SF90, F8 Tributo, 488, Purosangue

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF308 Compares to the 305 Forged Range

The UF308 sits in the Ultimate Forged tier — fully forged monoblock, maximum design freedom, lightest single-piece construction.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, structured split-spoke face
• 305 Forged UF121 — Y-spoke split with double inner tines, ten visible spoke elements
• 305 Forged UF123 — 10-spoke mesh face, highest spoke count in the UF monoblock lineup
• 305 Forged UF134 — directional 7-spoke twisted face, per-spoke rotational offset
• 305 Forged UF/2-101 — two-piece forged, custom barrel depth for deep concave builds
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, colour, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF308 different from other UF-series wheels?
8-spoke convex face — spokes angle outward at the face slightly, pushing visual volume toward the viewer and creating a fuller presence especially on EV platforms where the larger wheel gap amplifies spoke geometry.

Is the UF308 directional?
The UF308 is a non-directional design — the same wheel serves both sides without mirror pairing.

What vehicles does the UF308 fit best?
The UF308's 8-spoke design works well across a wide range of performance and luxury platforms. Popular fitments include 20×10 ET25 for Tesla Model S Plaid and 21×10.5 ET38 for BMW M5 G90. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Discover Hodoor World: Your Ultimate Car Customisation Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 1-Piece Monoblock Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF308 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.