305 Forjado UF305

305 Forged UF305 — Precision Engineering from Miami

The 305 Forged UF305 is the most architecturally structural wheel in the Ultimate Forged monoblock series. Five spoke bodies with fully vertical sides rise from the hub pocket to the barrel without taper, chamfer, or curvature. The only surface treatment concession is the machined bevel along each of the four spoke edges — a bevel that creates a defined bright line at every spoke corner without softening the fundamentally prismatic character of the spoke form.

The spoke wall height — the depth of the spoke body measured at its lateral face — is approximately 30% greater than the equivalent measurement on the UF101 or UF126. This additional height makes the spokes visible as three-dimensional structural elements rather than surface features of the wheel face. Viewed at oblique angles, the spoke sidewalls are fully visible as separate geometric surfaces, and the spoke cross-section is clearly rectangular rather than rounded.

The UF305 is positioned for luxury performance platforms that benefit from a wheel with visible structural presence — BMW M5 Touring, Audi RS6 Avant, Mercedes-AMG GLS 63, Bentley Bentayga EWB — where the combination of high mass and advanced engineering is part of the product identity. The high-wall spoke geometry makes the UF305 one of the most photogenic 5-spoke designs in the 305 Forged range because the spoke depth creates strong shadows regardless of lighting conditions.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 1-piece monoblock forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry
• Popular fitments: 21×10.5 ET40 for BMW M5 G90 Touring, 22×10.5 ET30 for Mercedes-AMG GLS 63, 21×10.5 ET38 for Audi RS6 Avant C8, 22×10 ET45 for Bentley Bentayga EWB

Fitment note: Every UF305 is built around your specific vehicle. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Design Language & Engineering: UF305

High-wall spoke construction in the UF305 is achieved by minimising the spoke face taper that most monoblock designs use to reduce weight. Where standard UF spokes taper from approximately 28mm wall height at the barrel to 18mm at the hub, the UF305 maintains 28mm±2mm wall height across the full spoke length. This constant section is structurally advantageous in torsional load scenarios because the spoke carries consistent cross-sectional area at every point along the radius.

The full-length machined bevel is applied to all four vertical edges of each spoke body — two on the face side and two on the spoke sidewalls. The bevel is cut at 45 degrees to a depth of 2mm, creating a chamfer width of approximately 2.8mm on each edge. Under direct light all four bevel lines produce simultaneous highlights, surrounding each spoke with a bright rectangular outline that emphasises the spoke's high-wall geometry and confirms its structural reading.

Recommended Finishes for the UF305

Raw Machined with Clear Coat: Natural machined aluminum with a clear coat for oxidation protection is the purest specification for the UF305, making no concession to cosmetic treatment and presenting the wheel purely as a precision-machined engineering component. The spoke wall height and bevel lines are fully visible without the softening effect of paint, and the material grain of the 6061-T6 billet is present in the finish.

Gloss Anthracite with Silver Bevel Lines: Gloss anthracite on the spoke faces and sidewalls with CNC-polished bevel edges creates four bright silver lines per spoke — a total of 20 highlight lines around the wheel face. The contrast between dark anthracite and polished bevels gives the UF305 a precision engineering aesthetic that suits BMW M-series and AMG competition builds.

Satin Black with Brushed Sidewalls: Satin black on the spoke faces with brushed finish on the spoke sidewalls creates a two-texture specification that emphasises the three-dimensional spoke structure of the UF305. The brushed sidewalls are visible through the inter-spoke gaps and from any angle other than directly front-on, confirming the spoke's high-wall depth to anyone viewing the wheel in person.

Technical Specifications

• Manufacturing: 1-piece monoblock forging — 6061-T6 aerospace billet forged under a 5,000-ton press and 5-axis CNC finish-machined to final spoke profile at 305 Forged's Miami facility
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF305 — high-wall 5-spoke with vertical spoke sides and full-length machined edge bevel along each spoke body
• Spoke count: 5 spokes
• Weight advantage: Monoblock construction typically 15–25% lighter than a cast equivalent; no barrel-to-face seam, no bolted hardware
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel colour
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Colour Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: PVD coatings, custom colour-matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70), iX
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63, GLS 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, e-tron GT RS
• Porsche: 911 (991/992), Cayenne, Panamera, Taycan
• Lamborghini: Huracán (EVO, STO, LP 640-4), Urus (Performante, S)
• Rolls-Royce & Bentley: Ghost (EWB), Phantom, Cullinan, Wraith; Continental GT Speed, Flying Spur, Bentayga (S, Speed, EWB)
• Ferrari: 812, SF90, F8 Tributo, 488, Purosangue

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF305 Compares to the 305 Forged Range

The UF305 sits in the Ultimate Forged tier — fully forged monoblock, maximum design freedom, lightest single-piece construction.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, structured split-spoke face
• 305 Forged UF121 — Y-spoke split with double inner tines, ten visible spoke elements
• 305 Forged UF123 — 10-spoke mesh face, highest spoke count in the UF monoblock lineup
• 305 Forged UF134 — directional 7-spoke twisted face, per-spoke rotational offset
• 305 Forged UF/2-101 — two-piece forged, custom barrel depth for deep concave builds
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, colour, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF305 different from other UF-series wheels?
UF305 carries the highest spoke wall height in the UF series — vertical spoke sides with a machined bevel along each edge produce a structural forged aesthetic closer to motorsport wheel engineering than to road-car styling.

Is the UF305 directional?
The UF305 is a non-directional design — the same wheel serves both sides without mirror pairing.

What vehicles does the UF305 fit best?
The UF305's 5-spoke design works well across a wide range of performance and luxury platforms. Popular fitments include 21×10.5 ET40 for BMW M5 G90 Touring and 22×10.5 ET30 for Mercedes-AMG GLS 63. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Discover Hodoor World: Your Ultimate Car Customisation Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 1-Piece Monoblock Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF305 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.