305 Forged UF201 Wheels

305 Forged UF201 — Precision Engineering from Miami

The 305 Forged UF201 is designed specifically for ultra-luxury vehicles where spoke presence must read as formal and substantial rather than sport-aggressive. Five wide spoke bodies curve gracefully from the hub to the barrel with a continuous outward sweep that references classical wheel design proportions — the proportion of a spoke to the overall wheel face is closer to jewellery design than to motorsport engineering.

The inner surface of each spoke — the face visible through the spoke opening when viewed at an angle — is machined to a polished finish. This inner wall polish means that even when the wheel is viewed from the side, rather than directly from the front, the wheel interior appears finished and intentional rather than exposed tooling. The outer spoke faces carry a medium brushed or polished finish depending on specification, creating a two-surface quality that is characteristic of hand-finished bespoke wheel work.

The UF201 is the standard specification for 305 Forged wheels on Rolls-Royce Ghost, Bentley Bentayga, and Mercedes-Maybach S-Class builds. At 22" diameter the wide spoke bodies provide the visual mass required to fill the arch of a long-wheelbase luxury saloon without appearing sparse. Custom offsets from ET30 to ET55 cover the range of luxury platform PCD specifications.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 1-piece monoblock forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry
• Popular fitments: 21×10.5 ET38 for Rolls-Royce Ghost, 22×10 ET45 for Bentley Bentayga, 22×10.5 ET30 for Mercedes-AMG S 63, 21×10 ET35 for BMW 7 Series M760e xDrive

Fitment note: Every UF201 is built around your specific vehicle. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Design Language & Engineering: UF201

The UF201 spoke width at mid-radius is approximately 20% greater than the UF126 9-spoke, despite having fewer spokes — the increased width compensates for the reduced spoke count while maintaining proportional visual coverage across the face area. The spoke taper narrows slightly from barrel to hub, with the hub end approximately 15% narrower than the barrel end, giving each spoke a sense of gathering and concentrating toward the centre rather than equally distributing across the face.

The polished inner spoke wall is achieved through a secondary CNC operation specifically for the UF201 that machines the inner face to a consistent 3-micron Ra surface roughness — the threshold at which a brushed or machined surface begins to produce a specular reflection. This secondary operation extends production time relative to other UF models but is specified as standard for all UF201 production regardless of outer finish choice.

Recommended Finishes for the UF201

Platinum Silver with Mirror Inner Walls: Platinum silver outer spoke faces with fully mirror-polished inner walls produce a wheel that appears different from every approach angle. Direct-front view: a formal silver 5-spoke. Side view: five bright mirror panels visible through the spoke openings. This specification is the most common UF201 choice on Rolls-Royce Ghost and Bentley Continental GT.

Satin Champagne Gold: Satin champagne gold across the full spoke face and inner wall gives the UF201 a warm, precious-metal quality appropriate for Rolls-Royce Bespoke and Bentley Mulliner wheel programmes. The satin finish on the UF201's wide spokes reads as more refined than gloss gold on a luxury vehicle — the subdued sheen suits the Ghost and Mulsanne's formal character.

Gloss Black with Polished Spoke Edges: Gloss black on the spoke faces with CNC-polished edge chamfers creates a disciplined formal specification suitable for Ghost Black Badge and AMG S 63 Obsidian Black editions. The polished edges provide definition without introducing colour contrast, maintaining the monochromatic character preferred by Black Badge and Night Series specifications.

Technical Specifications

• Manufacturing: 1-piece monoblock forging — 6061-T6 aerospace billet forged under a 5,000-ton press and 5-axis CNC finish-machined to final spoke profile at 305 Forged's Miami facility
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF201 — wide elegant 5-spoke with gracefully curved spoke bodies and polished inner spoke wall
• Spoke count: 5 spokes
• Weight advantage: Monoblock construction typically 15–25% lighter than a cast equivalent; no barrel-to-face seam, no bolted hardware
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel colour
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Colour Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: PVD coatings, custom colour-matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70), iX
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63, GLS 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, e-tron GT RS
• Porsche: 911 (991/992), Cayenne, Panamera, Taycan
• Lamborghini: Huracán (EVO, STO, LP 640-4), Urus (Performante, S)
• Rolls-Royce & Bentley: Ghost (EWB), Phantom, Cullinan, Wraith; Continental GT Speed, Flying Spur, Bentayga (S, Speed, EWB)
• Ferrari: 812, SF90, F8 Tributo, 488, Purosangue

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF201 Compares to the 305 Forged Range

The UF201 sits in the Ultimate Forged tier — fully forged monoblock, maximum design freedom, lightest single-piece construction.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, structured split-spoke face
• 305 Forged UF121 — Y-spoke split with double inner tines, ten visible spoke elements
• 305 Forged UF123 — 10-spoke mesh face, highest spoke count in the UF monoblock lineup
• 305 Forged UF134 — directional 7-spoke twisted face, per-spoke rotational offset
• 305 Forged UF/2-101 — two-piece forged, custom barrel depth for deep concave builds
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, colour, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF201 different from other UF-series wheels?
UF201 takes the 5-spoke layout toward ultra-luxury — wider spoke bodies with polished inner surfaces suit Rolls-Royce and Bentley platforms better than any track-oriented UF variant.

Is the UF201 directional?
The UF201 is a non-directional design — the same wheel serves both sides without mirror pairing.

What vehicles does the UF201 fit best?
The UF201's 5-spoke design works well across a wide range of performance and luxury platforms. Popular fitments include 21×10.5 ET38 for Rolls-Royce Ghost and 22×10 ET45 for Bentley Bentayga. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Discover Hodoor World: Your Ultimate Car Customisation Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 1-Piece Monoblock Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF201 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.