305 Forged UF/2-301

305 Forged UF2-301 — Precision Engineering from Miami

The 305 Forged UF2-301 is a fully forged 2-piece wheel from the UF/2 series — a forged 6061-T6 face bolted to a custom-depth barrel, allowing concave profiles that a monoblock cannot achieve. The UF2-301 features 3-spoke motorsport-heritage two-piece face with broad flat spoke bodies and deep center pocket, built to any diameter, width, offset, and bolt pattern to suit your build.

Design Language & Engineering: UF2-301

Three spokes at 120-degree spacing produce the maximum interpoke window area of any UF/2 design — at 22-inch diameter, each window opening is approximately 280mm at its widest point, large enough to display the full caliper body and rotor face without any spoke obstruction from standard viewing angles. The spoke width compensates for the reduced count: each UF2-301 spoke is approximately 55mm wide at mid-radius — nearly twice the width of a UF2-103 spoke at the same measurement point — maintaining face stiffness within the two-piece load distribution parameters.

The spoke faces are precision-flat to within 0.1mm across the spoke length, a tolerance tighter than the standard UF/2 production requirement. This flatness specification exists because the large visible spoke area in the UF2-301 makes any face deviation immediately apparent — a standard ±0.3mm flatness tolerance, acceptable on narrow-spoke designs where deviation is invisible, is visually disqualifying on a 55mm wide face. The hub junction on the UF2-301 is machined to a triangular land that mirrors the three-spoke geometry, maintaining the visual language of the face architecture through to the centrepoint.

Recommended Finishes for the UF2-301

Brushed Aluminum with Polished Barrel: The wide flat spoke face of the UF2-301 is an ideal canvas for directional brushing — the grain runs radially hub-to-rim, and at 55mm spoke width the brush pattern is clearly legible as a texture in its own right rather than a surface sheen. Polished barrel adds a brightness contrast at the wheel perimeter without disrupting the spoke character.

Gloss White: Three wide spokes in gloss white against exposed brake components creates a motorsport-reference aesthetic popular for track-day builds and GT3 homologation cars. The large window areas mean brake caliper colour has outsized visual impact — specify caliper finish alongside wheel colour for a coordinated result.

Satin Titanium with Triangular Hub Detail: The precision-flat spoke faces in satin titanium allow the triangular hub land to be diamond-cut as a contrast accent — a bright triangular form at wheel centre, echoing the three-spoke geometry. Custom machining detail available on request.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 2-piece fully forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry; the UF2-301's 3-spoke 3-spoke design accommodates a wide range from aggressive negative offsets to high positive ET for luxury sedan fitments
• Popular sport fitments: 21×12 ET52 for Lamborghini Huracán Super Trofeo, 21×11 ET25 for Ferrari 488 Challenge, 20×10.5 ET20 for McLaren Senna, 21×12 ET20 for Porsche 911 GT3 Cup (992)

Fitment note: Every UF2-301 is built around your specific car. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications

• Manufacturing: 2-piece fully forged — forged face section (6061-T6 aerospace aluminum) bolted to a custom-depth flow-formed barrel; hardware is titanium-grade, the interface is sealed and precision-machined
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF2-301 — 3-spoke motorsport-heritage two-piece face with broad flat spoke bodies and deep center pocket
• Spoke count: 3 spokes — the same wheel serves both sides without mirroring.
• Weight advantage: Two-piece construction allows custom barrel depth without weight penalty — the face mass is fixed, only barrel length changes
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel color
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Color Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: Custom color matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70)
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, SQ8
• Porsche: 911 (991/992), Cayenne, Panamera, Macan, Taycan
• Lamborghini: Huracán (EVO, STO), Urus (Performante, S)
• Lexus: LC 500, LS 500, LX 600, IS 500 F Sport
• Rolls-Royce & Bentley: Ghost, Wraith, Cullinan; Continental GT, Bentayga

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF2-301 Compares to the 305 Forged Range

The UF2-301 sits in the UF/2 Two-Piece tier — fully forged face with independently specified barrel depth — the deepest concave options in the 305 Forged lineup.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, staggered spoke pairing
• 305 Forged UF119 — flagship UF monoblock, refined multi-spoke face
• 305 Forged UF101 — the original Ultimate Forged monoblock
• 305 Forged UF/2-101 — entry two-piece forged, custom barrel depth
• 305 Forged FT108 — Flow Technik series, flow-formed monoblock
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, color, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF2-301 different from other UF/2-series wheels?
UF/2-301 is the only 3-spoke design in the 305 Forged two-piece catalog — three broad flat spokes reference motorsport wheel architecture (GT3/LMP) while the two-piece construction delivers the custom barrel depth that single-piece 3-spoke designs cannot achieve.

Is the UF2-301 non-directional?
The UF2-301 is a non-directional design — the same wheel serves both sides without mirroring.

What vehicles does the UF2-301 fit best?
The UF2-301's 3-spoke 3-spoke design works well on sports and supercar platforms. Popular fitments include 21×12 ET52 for Lamborghini Huracán Super Trofeo and 21×11 ET25 for Ferrari 488 Challenge. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Is the UF2-301 homologated for track use? The UF2-301 is produced to the same load and fatigue standards as all 305 Forged wheels — however, specific circuit or series homologation depends on the event regulations. Confirm wheel specification requirements with your series technical delegate before ordering for competition use.

Does the wide spoke width affect wheel weight? Total face weight of the UF2-301 is comparable to a standard 7-spoke UF/2 face of the same diameter — the three wide spokes displace approximately the same aluminium volume as seven narrower spokes. The structural advantage is in face stiffness-to-weight: fewer, wider spokes resist out-of-plane bending more efficiently than many narrow spokes.

Discover Hodoor World: Your Ultimate Car Customization Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products that are built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 2-Piece Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF2-301 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.