305 Forged UF/2-103

305 Forged UF2-103 — Precision Engineering from Miami

The 305 Forged UF2-103 is a fully forged 2-piece wheel from the UF/2 series — a forged 6061-T6 face bolted to a custom-depth barrel, allowing concave profiles that a monoblock cannot achieve. The UF2-103 features 7-spoke forged face with staggered spoke widths and modular bolt-on barrel, built to any diameter, width, offset, and bolt pattern to suit your build.

Design Language & Engineering: UF2-103

Seven spokes at equal angular spacing of 51.4 degrees produce a denser face fill than the five-spoke UF2-101 — at 21 inches the interpoke gap closes to approximately 85mm at the mid-radius measurement point, giving the wheel a visually solid appearance at distance while remaining open enough at close range to display the barrel depth. Each spoke profile maintains a mild outward convex curve on the visible face — less than 2mm crown height — which catches directional light and separates the UF2-103 silhouette from flat-milled 7-spoke designs in the same segment.

The barrel interface on the UF2-103 uses a standard 8-bolt ring (same pitch circle as UF2-101) but with a wider flange seat to accommodate the increased spoke root width. This means the face-to-barrel assembly achieves the same torque specification as single-piece designs at the bolt engagement length, a requirement 305 Forged applies to all UF/2 production regardless of spoke count. Custom barrel depths from 40mm to 100mm are available; the 7-spoke architecture distributes bending loads more evenly than 5-spoke across extended-depth barrels, making UF2-103 the preferred choice when depth exceeds 75mm.

Recommended Finishes for the UF2-103

Brushed Bronze: Seven spokes at consistent width create a wide canvas for directional brushing — the linear grain runs spoke-to-rim edge and reads as kinetic at low sun angles. Bronze has particular synergy with copper-tinted supercar body colours (Lamborghini Arancio, McLaren Papaya) where wheel and body share the same warm base hue.

Matte Graphite: The convex spoke profile in matte graphite creates subtle tonal variation without reflectivity — faces read slightly lighter than the barrel recess. Well suited to blacked-out builds and matte body wraps where high-gloss wheel finishes would compete rather than complement.

Polished Lip with Contrast Centre: A polished outer barrel lip in combination with a satin or brushed spoke face highlights the two-piece construction line and adds perimeter brightness at shows without the maintenance commitment of a fully polished wheel.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 2-piece fully forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry; the UF2-103's 7-spoke 7-spoke design accommodates a wide range from aggressive negative offsets to high positive ET for luxury sedan fitments
• Popular sport fitments: 21×11 ET20 for Porsche 911 GT3 RS (992), 21×10.5 ET25 for Ferrari 488 GTB, 22×10.5 ET15 for Lamborghini Huracán STO, 21×12 ET52 for Lamborghini Urus S

Fitment note: Every UF2-103 is built around your specific car. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications

• Manufacturing: 2-piece fully forged — forged face section (6061-T6 aerospace aluminum) bolted to a custom-depth flow-formed barrel; hardware is titanium-grade, the interface is sealed and precision-machined
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF2-103 — 7-spoke forged face with staggered spoke widths and modular bolt-on barrel
• Spoke count: 7 primary spokes — the same wheel serves both sides without mirroring.
• Weight advantage: Two-piece construction allows custom barrel depth without weight penalty — the face mass is fixed, only barrel length changes
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel color
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Color Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: Custom color matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70)
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, SQ8
• Porsche: 911 (991/992), Cayenne, Panamera, Macan, Taycan
• Lamborghini: Huracán (EVO, STO), Urus (Performante, S)
• Lexus: LC 500, LS 500, LX 600, IS 500 F Sport
• Rolls-Royce & Bentley: Ghost, Wraith, Cullinan; Continental GT, Bentayga

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF2-103 Compares to the 305 Forged Range

The UF2-103 sits in the UF/2 Two-Piece tier — fully forged face with independently specified barrel depth — the deepest concave options in the 305 Forged lineup.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, staggered spoke pairing
• 305 Forged UF119 — flagship UF monoblock, refined multi-spoke face
• 305 Forged UF101 — the original Ultimate Forged monoblock
• 305 Forged UF/2-101 — entry two-piece forged, custom barrel depth
• 305 Forged FT108 — Flow Technik series, flow-formed monoblock
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, color, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF2-103 different from other UF/2-series wheels?
UF/2-103 adds a 7th spoke to the two-piece lineup — wider face coverage than the UF/2-101 with the same custom barrel-depth advantage; suited to builds where full-face coverage matters.

Is the UF2-103 non-directional?
The UF2-103 is a non-directional design — the same wheel serves both sides without mirroring.

What vehicles does the UF2-103 fit best?
The UF2-103's 7-spoke 7-spoke design works well on luxury and sport platforms. Popular fitments include 21×11 ET20 for Porsche 911 GT3 RS (992) and 21×10.5 ET25 for Ferrari 488 GTB. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Why choose the UF2-103 over the 5-spoke UF2-101? The 7-spoke design improves visual mass coverage at large diameters (22"–24") and distributes radial load more evenly — preferred for GT cars where lateral cornering forces are higher than typical saloon fitments.

Is the UF2-103 available in directional configuration? The standard UF2-103 is non-directional. A directional spoke sweep variant can be ordered as a custom request — this requires separate left and right-hand face dies and adds 3–4 weeks to lead time.

Discover Hodoor World: Your Ultimate Car Customization Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products that are built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 2-Piece Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF2-103 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.