305 Forged UF/2-101

305 Forged UF2-101 — Precision Engineering from Miami

The 305 Forged UF2-101 is a fully forged 2-piece wheel from the UF/2 series — a forged 6061-T6 face bolted to a custom-depth barrel, allowing concave profiles that a monoblock cannot achieve. The UF2-101 features 5-spoke fully forged face with machined inner step and deep concave barrel section, built to any diameter, width, offset, and bolt pattern to suit your build.

Design Language & Engineering: UF2-101

The UF2-101 face is built around five evenly-spaced spokes of constant taper — each spoke narrows from approximately 32mm at the barrel interface to 22mm at the hub pocket, a ratio chosen to concentrate visual mass at the rim edge where it reads most strongly through an open-arch fitment. The spoke faces are flat-milled rather than convex-rolled, keeping the profile clean when viewed at low angles characteristic of street and show environments.

The two-piece construction joins the forged face to a custom-spun barrel via a precision bolt-ring at the inner barrel shoulder. The barrel depth is set per order — typically 45–70mm for standard fitments, extended to 90mm+ for deep concave builds. Because the face and barrel are separate forgings, offset is adjusted by shifting the barrel step position rather than reducing face wall thickness, preserving the minimum 6mm face spoke cross-section regardless of ET specification. Hub bore diameter is machined per vehicle — no adapter rings are used in the UF/2 assembly.

Recommended Finishes for the UF2-101

Gloss Black with Machined Spoke Faces: The flat spoke geometry of the UF2-101 reflects machining lines cleanly — a milled face against a satin-black barrel background reads as a deliberate two-texture contrast rather than an overlap. Recommended for dark body colours where the machined line acts as a visual separator.

Brushed Titanium: The even spoke width maintains consistent reflectivity across the face — brushed titanium avoids the hot-spot effect that polished finishes create on narrow spokes. Works across black, silver, and grey vehicles without colour-matching constraint.

Custom Two-Tone (Face + Barrel): The bolt-ring junction makes two-tone finishing natural — face in one colour, barrel in a contrasting shade. Popular for hypercar builds where brake caliper colour is echoed in the barrel finish.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 2-piece fully forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry; the UF2-101's 5-spoke 5-spoke design accommodates a wide range from aggressive negative offsets to high positive ET for luxury sedan fitments
• Popular sport fitments: 21×11.5 ET60 for Lamborghini Urus, 22×10.5 ET15 for Lamborghini Huracán EVO, 21×10.5 ET20 for Ferrari 812, 20×10.5 ET25 for McLaren GT

Fitment note: Every UF2-101 is built around your specific car. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Technical Specifications

• Manufacturing: 2-piece fully forged — forged face section (6061-T6 aerospace aluminum) bolted to a custom-depth flow-formed barrel; hardware is titanium-grade, the interface is sealed and precision-machined
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF2-101 — 5-spoke fully forged face with machined inner step and deep concave barrel section
• Spoke count: 5 spokes — the same wheel serves both sides without mirroring.
• Weight advantage: Two-piece construction allows custom barrel depth without weight penalty — the face mass is fixed, only barrel length changes
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel color
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Color Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: Custom color matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70)
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, SQ8
• Porsche: 911 (991/992), Cayenne, Panamera, Macan, Taycan
• Lamborghini: Huracán (EVO, STO), Urus (Performante, S)
• Lexus: LC 500, LS 500, LX 600, IS 500 F Sport
• Rolls-Royce & Bentley: Ghost, Wraith, Cullinan; Continental GT, Bentayga

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF2-101 Compares to the 305 Forged Range

The UF2-101 sits in the UF/2 Two-Piece tier — fully forged face with independently specified barrel depth — the deepest concave options in the 305 Forged lineup.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, staggered spoke pairing
• 305 Forged UF119 — flagship UF monoblock, refined multi-spoke face
• 305 Forged UF101 — the original Ultimate Forged monoblock
• 305 Forged UF/2-101 — entry two-piece forged, custom barrel depth
• 305 Forged FT108 — Flow Technik series, flow-formed monoblock
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, color, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF2-101 different from other UF/2-series wheels?
UF/2-101 opened the two-piece chapter of the 305 Forged catalog — a 5-spoke forged face with a custom-depth flow-formed barrel, setting the template that all UF/2 models follow.

Is the UF2-101 non-directional?
The UF2-101 is a non-directional design — the same wheel serves both sides without mirroring.

What vehicles does the UF2-101 fit best?
The UF2-101's 5-spoke 5-spoke design works well on sports and supercar platforms. Popular fitments include 21×11.5 ET60 for Lamborghini Urus and 22×10.5 ET15 for Lamborghini Huracán EVO. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Can the UF2-101 be ordered with a polished barrel? Yes — polished barrel is available as a custom option. The standard offering is satin or clear-coated barrel; polished adds approximately 2–3 weeks to production.

What is the minimum ET available for the UF2-101? Barrel depth can be extended to achieve ET10 or lower on most vehicle platforms. Confirm hub clearance with 305 Forged before specifying extreme negative offsets.

Discover Hodoor World: Your Ultimate Car Customization Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products that are built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 2-Piece Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF2-101 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.