305 Forged UF126 Wheels

305 Forged UF126 — Precision Engineering from Miami

The 305 Forged UF126 establishes purity of form as its primary design principle. Nine spokes spaced at uniform 40-degree intervals radiate from the hub pocket to the barrel without taper variation, asymmetry, or split. The result is a face with complete rotational symmetry that reads identically at every viewing angle and in either direction of rotation — an intentional constraint that produces a wheel suited to the most demanding chassis aesthetics.

Each spoke body maintains a slight uniform curve that bows outward by approximately 4mm at the spoke centerline. This subtle convexity means each spoke presents a different surface area to the viewer depending on the angle of view, creating gentle variation in how light falls across the face without departing from the wheel's essentially uniform character. The outer spoke edges carry a polished chamfer approximately 1.5mm wide that produces a continuous bright ring around the spoke perimeter.

The UF126 is a preferred specification for supercar platforms — Ferrari, McLaren, Porsche 911 — where the chassis and body design carries sufficient visual complexity that a restrained wheel is the more considered choice. The hub pocket is machined to 12mm concave depth, deeper than most UF monoblocks, reinforcing the apparent depth of the wheel face. Clear sightlines to any brake caliper configuration make the UF126 the natural choice when OEM colour-coded brake systems are part of the build specification.

Available Sizes

• Diameters: 13" | 14" | 15" | 16" | 17" | 18" | 19" | 20" | 21" | 22" | 23" | 24"
• Widths: 8.0J–13.5J (custom — any barrel width machined to your specification)
• Construction: 1-piece monoblock forged
• PCD options: 5x112, 5x114.3, 5x120, 5x130, 5x150, 5x108, 5x120.65, 6x139.7 — center-lock on request
• Offset (ET): Fully custom — any ET to suit your suspension geometry
• Popular fitments: 20×9.5 ET20 for Porsche 911 S (992), 21×10.5 ET37 for Ferrari 488 GTB, 20×10 ET40 for BMW M4 Competition, 21×9.5 ET20 for McLaren GT

Fitment note: Every UF126 is built around your specific vehicle. Send your make, model, year, brake package, and desired stance to [email protected] — fitment confirmed within 24 hours.

We also offer an AI Wheel Design Service if you want a custom spoke pattern or finish concept designed before production begins.

Design Language & Engineering: UF126

Nine-spoke uniform geometry dates to the earliest generation of CNC-machined forged wheels and remains one of the most structurally efficient arrangements for monoblock forging. Each spoke in the UF126 carries approximately equal cross-sectional area, distributing rotational and lateral loads with minimum spoke-weight variance. This regularity also simplifies quality control — a deviation in any single spoke is immediately visible against the eight consistent references surrounding it.

On dark finishes the 1.5mm polished chamfer produces nine bright outline rings against the spoke face, effectively redrawing the spoke silhouette in light. The effect is understated at normal viewing angles and striking in direct sunlight. On silver or natural aluminum finishes the chamfer amplifies spoke visual definition by introducing a specular highlight edge that persists regardless of ambient light level.

Recommended Finishes for the UF126

Satin Black with Polished Chamfer: The most-requested UF126 specification. The polished chamfer edge on each of the nine spokes produces nine bright outline rings against the satin black face. The effect is understated at normal viewing angles and striking in direct sunlight, working equally on performance cars and luxury vehicles.

Brushed Titanium with Dark Tint Clear: A titanium PVD base under a smoke-tinted clear coat gives the UF126 a muted metallic quality that changes character with lighting — under interior lighting the dark tint dominates; in direct sun the titanium flash emerges. Suited to builds where the wheel's appearance should shift between settings.

Gloss White with Chrome Chamfer: For high-contrast builds on dark vehicle finishes. Chrome chamfers on a gloss white face create a ten-visible-element outline pattern. Typically specified on Matte Black, Matte Graphite, or Matte Magnetic vehicle finishes where the white wheel creates maximum contrast against the body.

Technical Specifications

• Manufacturing: 1-piece monoblock forging — 6061-T6 aerospace billet forged under a 5,000-ton press and 5-axis CNC finish-machined to final spoke profile at 305 Forged's Miami facility
• Material: 6061-T6 aerospace-grade forged aluminum
• Design: UF126 — 9-spoke uniform radial layout with slight outward bow and polished chamfer along each spoke edge
• Spoke count: 9 spokes
• Weight advantage: Monoblock construction typically 15–25% lighter than a cast equivalent; no barrel-to-face seam, no bolted hardware
• Hub bore: Custom-machined hub-centric to your vehicle specification — no spigot rings or adapters required
• Available Widths: 8.0J–13.5J — custom barrel width machined per order
• Center cap: 305 Forged branded aluminum center cap, finish-matched to your ordered wheel colour
• Build lead time: 4–8 weeks from confirmed order and deposit
• Origin: Designed and manufactured by 305 Forged, Miami, FL, USA

Finish & Colour Options

• Brushed: Brushed Aluminum, Brushed Titanium, Brushed Bronze, Brushed Gunmetal, Brushed Gold
• Gloss: Gloss Black, Gloss White, Gloss Anthracite, Gloss Candy Red, custom paint codes
• Matte: Matte Black, Matte Gunmetal, Matte Bronze, Matte Anthracite
• Polished: Full polished lip, polished face, two-tone combinations
• Premium: PVD coatings, custom colour-matching to factory or wrap codes on request

All finishes applied at 305 Forged's Miami facility. Finish samples available before production confirms.

Vehicle Fitment Guide — Common Platforms

Built to order for any application — PCD, offset, and brake clearance confirmed before production:

• Tesla: Model S (Plaid, Long Range), Model 3 (Performance), Model X, Model Y Performance
• BMW: M3 (G80), M4 (G82/G83), M5 (F90/G90), M8, X5 M, X6 M, 7 Series (G70), iX
• Mercedes-AMG: C 63, E 63, S 63, G 63 (W463/W464), GT 63 4-Door, GLE 63, GLS 63
• Audi: RS3, RS4, RS5, RS6 Avant, RS7, R8 V10, RS Q8, e-tron GT RS
• Porsche: 911 (991/992), Cayenne, Panamera, Taycan
• Lamborghini: Huracán (EVO, STO, LP 640-4), Urus (Performante, S)
• Rolls-Royce & Bentley: Ghost (EWB), Phantom, Cullinan, Wraith; Continental GT Speed, Flying Spur, Bentayga (S, Speed, EWB)
• Ferrari: 812, SF90, F8 Tributo, 488, Purosangue

Contact [email protected] — fitment confirmed within 24 hours.

Other Bolt Patterns — Built to Your Specification

• 5x112 — Mercedes-AMG, Audi, Volkswagen Touareg, Porsche (5-lug variants)
• 5x120 — BMW M-series (G-platform), Rolls-Royce, Bentley Continental
• 5x114.3 — Tesla Model 3/Y, Nissan GT-R, Lexus LC/LX, Infiniti
• 5x130 — Porsche 911 (991/992), Cayenne, Panamera
• 5x150 — Lexus LX 600, Toyota Land Cruiser 300
• 5x108 — Ferrari 458/488/F8, Aston Martin, Maserati

How the UF126 Compares to the 305 Forged Range

The UF126 sits in the Ultimate Forged tier — fully forged monoblock, maximum design freedom, lightest single-piece construction.

Explore the 305 Forged Lineup at Hodoor World

• 305 Forged UF128 — asymmetric 8-spoke monoblock, structured split-spoke face
• 305 Forged UF121 — Y-spoke split with double inner tines, ten visible spoke elements
• 305 Forged UF123 — 10-spoke mesh face, highest spoke count in the UF monoblock lineup
• 305 Forged UF134 — directional 7-spoke twisted face, per-spoke rotational offset
• 305 Forged UF/2-101 — two-piece forged, custom barrel depth for deep concave builds
• Browse all forged wheels at Hodoor World

Can't Find the Right Wheel? Order Custom Forged

If this model isn't quite right for your build, Hodoor offers a custom forged wheel manufacturing service. Send us any reference image or sketch, and we manufacture the wheel fully forged from 6061-T6 aluminum in any size, colour, and bolt pattern. You can also use our AI Wheel Design Service to visualise your concept before production begins. Contact us at [email protected] or WhatsApp +44 7488 818747.

How to Order

1. Send your car details — make, model, year, brake package, and preferred finish to [email protected] or WhatsApp +44 7488 818747.
2. Fitment quote within 24 hours — we confirm diameter, width, offset, brake clearance, and hub bore for your exact vehicle.
3. Invoice and deposit — production starts once confirmed; balance due before shipping.
4. Build lead time 4–8 weeks — tracked from first day of production.
5. Shipping to your door — fully insured, worldwide delivery with tracking.

Frequently Asked Questions

What makes the UF126 different from other UF-series wheels?
9-spoke uniform radial design — equal 40-degree spoke spacing ensures no single viewing angle creates an empty gap aligned with the caliper, producing perpetual visual variation through rotation that even-number layouts cannot match.

Is the UF126 directional?
The UF126 is a non-directional design — the same wheel serves both sides without mirror pairing.

What vehicles does the UF126 fit best?
The UF126's 9-spoke design works well across a wide range of performance and luxury platforms. Popular fitments include 20×9.5 ET20 for Porsche 911 S (992) and 21×10.5 ET37 for Ferrari 488 GTB. As a custom build-to-order wheel, it adapts to any vehicle — contact us for exact fitment advice.

What sizes are available?
Diameters 13"–24", widths 8.0J–13.5J, any offset and PCD. Hub bore is custom-machined hub-centric — no spacers or adapters needed.

How long does production take?
4–8 weeks from confirmed order and deposit. Rush production may be available — ask at [email protected].

Can I see a finish sample before ordering?
Yes — 305 Forged provides finish samples prior to production. Specify your preferred finish at enquiry and a sample is arranged before the order is confirmed.

Discover Hodoor World: Your Ultimate Car Customisation Destination

Hodoor World is the UK's premier destination for forged wheels, body kits, and performance upgrades from the world's leading brands. Our team of specialists sources and ships globally, with a focus on custom-order products built to your exact specification. We work with 305 Forged, Brixton, Vossen, Forgiato, Lexani, and over 50 other wheel brands.

Leave a review on Trustpilot after your purchase — we read every one.

Wheel Care — 1-Piece Monoblock Forged

Forged aluminum wheels require minimal maintenance but benefit from regular attention to preserve the finish:

• Clean with pH-neutral wheel cleaner and soft microfibre — avoid acid-based or alkaline products
• Rinse thoroughly after motorway driving in winter (road salt accelerates surface oxidation)
• Inspect for kerb marks seasonally — minor surface scratches can be polished out; deeper marks should be repaired before moisture ingress
• Re-torque wheel bolts to spec after the first 50–100 km following fitment
• Store unmounted wheels vertically on padded pegs — never stack horizontally (face distortion risk)

305 Forged UF126 — International Delivery

Hodoor World ships 305 Forged wheels worldwide from our UK warehouse. Standard delivery times: UK 3–5 days, Europe 5–10 days, USA/Canada 7–14 days, UAE/GCC 5–7 days, Australia/Asia 10–18 days. All shipments are fully insured and tracked. Import duties where applicable are the buyer's responsibility — contact us for a landed cost estimate to your country. Email [email protected] or WhatsApp +44 7488 818747.